IPCIPFilter

Revision as of 23:18, 11 August 2016 by Qi (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

IP Filter

You can enable IP filter function so that some specified IP/MAC user can access the network camera. You can add IP address or IP address section. If you do not check the box here, it means there is on access limit. Here you can add IP address and MAC address. You must add these addresses before enabling the trusted sites.

Please note: You must set MAC address in the same network segment. IPCIPFilter.jpg

Ipcipfilter001.png