Difference between revisions of "LincX2PRO/Setup Motion Detection Recording on Dahua Recorder"
| (9 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
=Setup Motion Detection Recording on Dahua Recorder= | =Setup Motion Detection Recording on Dahua Recorder= | ||
| + | __NOTOC__ | ||
==Description== | ==Description== | ||
This guide will show how to setup Motion Detection recording on a Dahua recorder with a LincX2PRO device | This guide will show how to setup Motion Detection recording on a Dahua recorder with a LincX2PRO device | ||
| + | |||
| + | Here are the required steps: | ||
| + | * Add LincX2PRO Device to Dahua Recorder - [[LincX2PRO/Add Device To Dahua Recorder|How To Add LincX2PRO Device To a Dahua Recorder]] | ||
| + | * Follow the steps on this page to configure Motion Recording at the Dahua recorder | ||
| + | |||
==Prerequisites== | ==Prerequisites== | ||
* Dahua recorder | * Dahua recorder | ||
* LincX2PRO device | * LincX2PRO device | ||
| − | * LincX2PRO device added to Dahua recorder - [[ | + | * LincX2PRO device added to Dahua recorder - [[LincX2PRO/Add Device To Dahua Recorder|How To Add LincX2PRO Device To a Dahua Recorder]] |
| − | + | ||
| − | ==Instructions== | + | ==Video Instructions== |
| − | < | + | <embedvideo service="youtube">https://youtu.be/m6XdsuQDnuE</embedvideo> |
| − | [[File: | + | |
| − | < | + | ==Step by Step Instructions== |
| − | < | + | |
| + | 1. On the main menu select '''Alarm''' | ||
| + | |||
| + | [[File:NewGUIMotionDetection1.png|600px]] | ||
| + | |||
| + | 2. Select '''Video Detection''' on the left. | ||
| + | <br>Then select the '''Motion Detection''' tab at the top. | ||
| + | <br>Choose the channel from the drop-down next to '''Channel'''. | ||
| + | <br>Check the box next to '''Enable'''. | ||
| + | <br>Check the box next to '''Record Channel'''. | ||
| + | <br>Click on '''Setting''' next to '''Region''' | ||
| + | |||
| + | [[File:NewGUIMotionDetection2.png|600px]] | ||
| + | |||
| + | 3. Highlight the areas in red where you want to track motion. | ||
| + | <br>Then click '''OK''' at the bottom | ||
| + | |||
| + | [[File:NewGUIMotionDetection3.png|600px]] | ||
| + | |||
| + | 4. Select '''More''' at the bottom | ||
| + | <br>Check the boxes next to any of the other options you want to activate when motion is detected. | ||
| + | <br>Click on '''OK''' | ||
| + | |||
| + | [[File:NewGUIMotionDetection4.png|600px]] | ||
| + | |||
| + | 5. Click on '''Apply''' at the bottom. | ||
| + | <br>You will see "Operation Succeeded" at the top when your changes have been saved | ||
| + | |||
| + | [[File:NewGUIMotionDetection5.png|600px]] | ||
| + | |||
| + | 6. Click on the '''Setting''' drop-down at the top and select '''Storage''' | ||
| + | |||
| + | [[File:NewGUIMotionDetection6.png|600px]] | ||
| + | |||
| + | 7. Select '''Schedule''' on the left. | ||
| + | <br>Then select the '''Record''' tab at the top. | ||
| + | <br>Choose the channel from the drop-down next to '''Channel'''. | ||
| + | <br>Click on the '''Setting''' button next to any day of the week. | ||
| + | |||
| + | [[File:NewGUIMotionDetection7.png|600px]] | ||
| + | |||
| + | 8. Check the '''All''' box to enable all days of the week. | ||
| + | <br>Check the '''Motion''' box for "Period 1". | ||
| + | <br>Click '''OK''' at the bottom. | ||
| + | |||
| + | [[File:NewGUIMotionDetection8.png|600px]] | ||
| + | |||
| + | 9. Click on '''Apply''' at the bottom to save the settings | ||
| + | |||
| + | [[File:NewGUIMotionDetection9.png|600px]] | ||
| + | |||
| + | 10. Select '''Record Mode''' on the left. | ||
| + | <br>Then make sure '''Auto''' is enabled for the appropriate channel(s). | ||
| + | <br>Click on '''Apply''' at the bottom. | ||
| − | + | [[File:NewGUIMotionDetection10.png|600px]] | |
| − | [[File: | ||
| − | |||
| − | |||
| − | + | 11. Click on the Main Menu icon at the top right. | |
| − | + | <br>Then select '''Search''' | |
| − | |||
| − | |||
| − | + | [[File:NewGUIMotionDetection11.png|600px]] | |
| − | [[File: | ||
| − | |||
| − | |||
| − | + | 12. Check box next to the channel on the right. | |
| − | + | <br>You should see yellow lines/bars for motion recording | |
| − | < | ||
| − | |||
| − | + | [[File:NewGUIMotionDetection12.png|600px]] | |
| − | [[File: | ||
| − | |||
| − | |||
Latest revision as of 18:28, 26 February 2024
Setup Motion Detection Recording on Dahua Recorder
Description
This guide will show how to setup Motion Detection recording on a Dahua recorder with a LincX2PRO device
Here are the required steps:
- Add LincX2PRO Device to Dahua Recorder - How To Add LincX2PRO Device To a Dahua Recorder
- Follow the steps on this page to configure Motion Recording at the Dahua recorder
Prerequisites
- Dahua recorder
- LincX2PRO device
- LincX2PRO device added to Dahua recorder - How To Add LincX2PRO Device To a Dahua Recorder
Video Instructions
Step by Step Instructions
1. On the main menu select Alarm
2. Select Video Detection on the left.
Then select the Motion Detection tab at the top.
Choose the channel from the drop-down next to Channel.
Check the box next to Enable.
Check the box next to Record Channel.
Click on Setting next to Region
3. Highlight the areas in red where you want to track motion.
Then click OK at the bottom
4. Select More at the bottom
Check the boxes next to any of the other options you want to activate when motion is detected.
Click on OK
5. Click on Apply at the bottom.
You will see "Operation Succeeded" at the top when your changes have been saved
6. Click on the Setting drop-down at the top and select Storage
7. Select Schedule on the left.
Then select the Record tab at the top.
Choose the channel from the drop-down next to Channel.
Click on the Setting button next to any day of the week.
8. Check the All box to enable all days of the week.
Check the Motion box for "Period 1".
Click OK at the bottom.
9. Click on Apply at the bottom to save the settings
10. Select Record Mode on the left.
Then make sure Auto is enabled for the appropriate channel(s).
Click on Apply at the bottom.
11. Click on the Main Menu icon at the top right.
Then select Search
12. Check box next to the channel on the right.
You should see yellow lines/bars for motion recording
