NVR/Basic Setup/Initialize Dahua IP Camera via FLIR NVR POE
Revision as of 23:28, 26 February 2019 by Arran Williams (talk | contribs)
Initialize Dahua IP Camera via FLIR NVR POE
1. Launch ToolBox and run ConfigTool
2. Click Initialize
3. Select Device and Click Initialize
4. Create Password and Enter Password Recovery Email.
5. Select options for Easy4IP and update settings
6. Your device should now be activated
7. Select Edit and change IP to DHCP
8. Your device should update to a usable IP address for your NVR