NVR/Recording Setup/Alarm Recording Setup

Revision as of 16:27, 11 August 2016 by Mark (talk | contribs) (Description)

How to Setup Alarm Recording Using A Physical Alarm

Description

Connect Physical alarm in conjunction to work with Dahua recording devices.

Prerequisites

  • A NVR or IP Camera with an Alarm Out

PhysicalAlarmRecordSetup8Large.JPG

  • A low voltage physical alarm

PhysicalAlarmRecordSetup1Large.JPG

  • Dual pair 24 gauge run to the physical alarm

PhysicalAlarmRecordSetup15Large.JPG

  • Alarm block

PhysicalAlarmRecordSetup6Large.JPG

Video Instructions

Step by Step Instructions

1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1"

PhysicalAlarmRecordSetup14.JPG

2. Connect the cable to your physical alarm.

PhysicalAlarmRecordSetup9Large.JPG->PhysicalAlarmRecordSetup10Large.JPG

3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground"

PhysicalAlarmRecordSetup11Large.JPG

4. Login to the NVR, and click, "Setup"

AlarmRecordSetup1.png

5. Click, "Event"

AlarmRecordSetup2.png

6. Click, "Alarm"

AlarmRecordSetup3.png

7. Select the Channel, and enable, "Local Alarm"

AlarmRecordSetup4.png

8. Select either, "NO" or "NC"

AlarmRecordSetup5.png

9. Next select what actions you want the system to perform, when the alarm is activated.

AlarmRecordSetup6.png

10. Click, "OK"

AlarmRecordSetup7.png

Links

Related Articles in Category:Record

<DynamicPageList> category = Record count=5 </DynamicPageList>

<DynamicPageList> category = Record offset = 5 count= 5 </DynamicPageList>

<DynamicPageList> category = Record offset = 10 count=5 </DynamicPageList>