Difference between revisions of "New GUI/AI/Tripwire Setup"

Line 47: Line 47:
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_8.jpg|500px]]
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_8.jpg|500px]]
  
8. Use the dropdown box to change the Rule Type to "Missing"
 
  
[[File:How_To_Setup_Missing_-_NewGUI_-_2.jpg|500px]]
 
  
 
9. Click the Pencil icon to draw the Tripwire rule
 
9. Click the Pencil icon to draw the Tripwire rule

Revision as of 21:37, 7 August 2019

How To Setup Tripwire

Description

This article will show you how to setup the tripwire IVS feature on a supported device

Prerequisites

  • Supported device with tripwire feature

Video Instructions

Step by Step Instructions

1. From the Main Menu click AI

How To Setup Intrusion - NewUI - 1.jpg

2. Click Parameters > Smart Plan

How To Setup Intrusion - NewUI - 2.jpg

3. Use the drop down box to select the Channel

How To Setup Intrusion - NewUI - 3.jpg

4. Click the IVS icon to enable.

How To Setup Intrusion - NewUI - 4.jpg

The icon will highlight when selected.

Click Apply

How To Setup Intrusion - NewUI - 5.jpg

5. Click Parameters > IVS

How To Setup Intrusion - NewUI - 6.jpg

6. Use the drop-down box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

How To Setup Intrusion - NewUI - 7.jpg

7. The created rule will appear in the list

How To Setup Intrusion - NewUI - 8.jpg


9. Click the Pencil icon to draw the Tripwire rule

Tripwire Setup - NewGUI - 9.jpg

10. The Channel will fullscreen.

Left click anywhere inside the video frame to begin drawing the Trip line, then use the mouse to draw the trip line.

Right click to end drawing

Tripwire Setup - NewGUI - 10.jpg

Tripwire Setup - NewGUI - 11.jpg

11. The Tripwire menu will appear

Tripwire Setup - NewGUI - 12.jpg

  • Name: A name can be applied to the rule
  • Direction: Both, A To B, B To A

Click Tripwire Setup - NewGUI - Target Filter.jpg icon to set the Target Filter (maximum and minimum size size for Objects to follow rule)

Click Tripwire Setup - NewGUI - Trash Icon.jpg icon to clear the current rule

Once the tripwire rule settings have been created click OK

12. Click the Tripwire Setup - NewGUI - Trigger.jpg icon to set the Trigger settings when the IVS Tripwire rule is engaged.

Tripwire Setup - NewGUI - 13.jpg

13. The Trigger menu will appear

Tripwire Setup - NewGUI - 14.jpg

  • Period
  • Alarm Out
  • Snapshot

Once the trigger rule settings have been created click OK

14. Once all Tripwire settings have been configured, Click Apply in the lower right of the screen to save all changes

Tripwire Setup - NewGUI - 15.jpg

15. The created Tripwire is now programmed

Tripwire Setup - NewGUI - 16.jpg