PTZ Pattern Setup

Revision as of 16:15, 2 August 2019 by JP (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

HDCVI Pattern Tutorial

Description

How To Dewarp set up a pattern for your PTZ

Step by step instructions From Web Browser

1.Log into your device from its IP address in your web browser

2.Select the down arrow to expand your PTZ Control Menu

Liveviewpage.png

3.Select Pattern from the drop down menu

Selectpattern.png

4.Select Start Record

Startrecording.png

5.Using the Arrows on the PTZ menu Draw the pattern you wish your PTZ to follow

6.Select Stop Record

Your pattern should now be applied to the Pattern number selected.

Step By Step Instructions From local Monitor

1.Log into your DVR

2.Right click and select PTZ from the drop down menu

Selectptzmenu1.png

3.Click the arrow on the right hand side to expand the menu

Expandptzmenu.png

4.Click Aux Config from the icon shown below

Selectmore.png 1

5.Select Pattern

6.Select start and use the arrows to create the desired pattern

Selectstart.png

7.Select End to complete your pattern