SmartPSS/How To Use PTZ Pattern in SmartPSS

Revision as of 21:24, 1 April 2019 by Marques.Phillips (talk | contribs) (How To Use PTZ Pattern In SmartPSS)

How To Use PTZ Pattern In SmartPSS

Description

This article will show you how to setup and use PTZ Pattern in SmartPSS 2.0

Prerequisites

Video Instructions

Step by Step Instructions

1. Launch SmartPSS.

Preset SmartPSS 1.jpg

2. Click 'Live View'

Preset SmartPSS 2.jpg

3. Double Click the PTZ on the device list on the left side of the screen, then double click the video pane to bring the feed up in full screen

Preset SmartPSS 3.jpg

4. Click 'PTZ'

Preset SmartPSS 4.jpg

5. Click 'More Functions' in the lower portion of the screen

Preset SmartPSS 5.jpg

6. Use the drop-down box to select 'Pattern' and select the Pattern number you wish to program

How To Use PTZ Pattern In SmartPSS - 1.jpg

7. Click 'Start Set Pattern'. An onscreen notification will appear to confirm.

How To Use PTZ Pattern In SmartPSS - 2.jpg

How To Use PTZ Pattern In SmartPSS - 3.jpg

8. Use the on-screen controls to move the PTZ - the camera's movement will be recorded until the Pattern Setup reaches 100% or by clicking 'Stop Setting Pattern'

How To Use PTZ Pattern In SmartPSS - 4.jpg

9. Click 'Start Pattern'. The pattern will begin to run until complete.

How To Use PTZ Pattern In SmartPSS - 5.jpg