SmartPSS/Menu/Device CFG

Revision as of 17:31, 6 September 2016 by Nathan (talk | contribs) (General)

SmartPSS Menu-Device Config

Description

The Device Config menu is used to change the settings on IP cameras and NVR's. Follow the instructions below to learn about device configuration through SmartPSS.

Prerequisites

  • SmartPSS Installed on computer
  • Connected device such as an IP camera or NVR
  • Device added onto SmartPSS successfully

Video Instructions

Step by Step Instructions

1. Launch SmartPSS and on the home page click DEVICE CFG.

Spssdevcfg0021.jpg

2. On the left column click your designated device to configure.

Spssdevcfg010.jpg

3. Follow Each section below to access the specific Setting:

General

Network
  • TCP/IP: Enter this section to configure the systems IPV4 and IPV6 network settings, you can also enable or disable DHCP here.

Devicecfgpss001.jpg

  • Connect: Enter this section to configure the Max connections and

DeviceConfigConnect.png

  • PPPoE:

DeviceConfigPPPoE.png

  • DDNS:

DeviceConfigDDNS.png

  • IP Filter:

DeviceConfigIPFilter.png

  • SMTP:

DeviceConfigSMTP.png

  • FTP:

DeviceConfigFTP.png

  • Multicast:

DeviceConfigMulticast.png

  • Alarm Centre:

DeviceConfigAlarmCentre.png

Remote Devices

DeviceConfigRemoteDevice.jpg

Encode

Spssdevcfg009.jpg

Image

Spssdevcfg012.jpg

PTZ Control

Spssdevcfg015.jpg

Event

Video Detect

Spssdevcfg019.jpg

Alarm

Spssdevcfg008.jpg

Abnormality

Usbssbkup022.png

Storage

Record

Spssdevcfg016.jpg

HDD

Spssdevcfg011.jpg

Maintenance

Account

Spssdevcfg007.jpg

Maintenance

Spssdevcfg013.jpg

WEB

Spssdevcfg020.jpg

Related Links