SmartPSS/View Device

Revision as of 15:37, 11 April 2019 by Marques.Phillips (talk | contribs) (How To View A Device In SmartPSS)

How To View A Device In SmartPSS

Description

This article will show you how to view a device in SmartPSS

Prerequisites

Video Instructions


Step by Step Instructions

1. Launch SmartPSS.

Two Monitors Smart PSS -1.jpg

2. Click Live View

How To View Device SmartPSS - 1.jpg

3. The device tree on the left will show all devices added to SmartPSS.

How To View Device SmartPSS - 2.jpg

4. Click on a device then drag and drop to a tile in the center of the screen to load the stream

How To View Device SmartPSS - 3.jpg

5. Use the Layout Options in the bottom right of the screen to adjust the Live View to 2X2, 3x3, 4x4, or create your own custom layout

How To View Device SmartPSS - 4.jpg

6. Double click within a video pane to bring the stream full screen

How To View Device SmartPSS - 5.jpg

View Device in SmartPSS

Description

View live video feed of devices.

Prequisites

  • SmartPSS
  • Device IP
  • If using P2P you will need to input Device SN number of NVR/DVR (P2P has to be enabled on device).

Video Instructions

Step by Step Instructions

1. From the Main Page select Live View.

500px


Please Note: Devices must be already added in order to the devices stream.

500px


2. On the right side click or drag a device into view.

500px