Template:DMSS/Instructions/LincX2PRO Floodlight Setup

1. Launch the DMSS Mobile App.
Tap on Device at the bottom to access your added device list.
Select one of your added device that you wish to setup/modify Floodlight Settings for. Tap on ... .

2. Select Device Details

3. Scroll down and select Floodlight Settings

4. Tap on Select Mode

5. Select which mode you want the floodlight to follow: Motion Activation, Manual, Schedule, or PIR
Tap on OK

PIR Mode

1. Set the Select Mode to PIR

2. Select Brightness

3. Adjust the slider under Brightness Settings to the desired brightness level for the floodlight.
When you are done, select Save at the top

4. Select Color Temperature

5. Select Cool if you want a blue-ish color for the light or select Warm if you want a yellowish color for the light

6. Select PIR Region

7. Drag the slider on the right for the amount of distance you want the PIR to monitor. (100% = 10m [32.81 ft])
Tap the 3 zones either ON or OFF.
Select Save at the top

8. Select Light Duration

9. Select the duration the light will stay on once activated.
Tap on OK

Motion Activation

1. Set the Select Mode to Motion Activation

2. Select Brightness

3. Adjust the slider under Brightness Settings to the desired brightness level for the floodlight.
When you are done, select Save at the top

4. Select Color Temperature

5. Select Cool if you want a blue-ish color for the light or select Warm if you want a yellowish color for the light

6. Select Light Duration

7. Select the duration the light will stay on once activated.
Tap on OK

Manual Mode

1. Set the Select Mode to Manual

2. Select Brightness

3. Adjust the slider under Brightness Settings to the desired brightness level for the floodlight.
When you are done, select Save at the top

4. Select Color Temperature

5. Select Cool if you want a blue-ish color for the light or select Warm if you want a yellowish color for the light

Schedule Mode

1.