Template:DSS/Instructions/Record Motion Detect DSS Pro

Revision as of 02:01, 9 September 2020 by Nicky Gunakan (talk | contribs) (Step by Step Instruction)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Setup record schedule to only record on motion

Description

This article is to show how to setup DSS to only record on motion.

Prerequisites

  • DSS Pro Hardware or Software
  • Device added to DSS Pro

Notes: If you are using third-party cameras, please note that

Video Instruction

coming soon

Step by Step Instruction

1. Locate DSS Pro web manager and login with the admin credential.

2. Click on Event.

DSS Pro Event.jpg

3. Click on Add.

DSS Pro Event Add.jpg

4. Under Alarm Type, Click on Video Channel.

5. Click checkmark on Motion Detect.

6. Under Alarm Source, select the device that you would like to assign for motion only recording.

DSS Pro Add Alarm Scheme.jpg

7. Click on Alarm Linkage.

DSS Pro Alarm Linkage.jpg

8. Click on Link Actions, and then click on Link Cameras.

9. Set the record time and also prerecord time.

 Notes: there is two additional option here that you can enable. First, you can capture a picture when alarm is triggered. And second, you can get pop-up video when alarm is triggered (require to Link User to specify which user getting video pop-up).

10. Click on Alarm Attribute.

11. Enter Alarm info name. in this tutorial, we name it Motion Detect.

DSS Pro Alarm Attribute.jpg

12. Click Ok to save the settings.

DSS Pro Event Created.jpg