Difference between revisions of "Template:Tripwire SystemUI NewGUI"

Line 4: Line 4:
  
 
===Step by Step Instructions===
 
===Step by Step Instructions===
1. From the Main Menu click AI
+
1. From the Main Menu select '''AI'''
  
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_1.jpg|500px]]
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_1.jpg|500px]]
  
2. Click Parameters > Smart Plan
+
2. Select '''Parameters''' on the left.
 +
 
 +
Select '''Smart Plan'''.
  
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_2.jpg|500px]]
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_2.jpg|500px]]
Line 16: Line 18:
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_3.jpg|500px]]
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_3.jpg|500px]]
  
4. Click the IVS icon to enable.  
+
4. Click and highlight '''IVS''' (You may need to de-select any other options).
  
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_4.jpg|500px]]
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_4.jpg|500px]]
Line 22: Line 24:
 
The icon will highlight when selected.
 
The icon will highlight when selected.
  
Click Apply  
+
Click '''Apply'''
  
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_5.jpg|500px]]
 
[[File:How_To_Setup_Intrusion_-_NewUI_-_5.jpg|500px]]
Line 72: Line 74:
  
 
[[File:Tripwire_Setup_-_NewGUI_-_13.jpg|500px]]
 
[[File:Tripwire_Setup_-_NewGUI_-_13.jpg|500px]]
 
13. The Trigger menu will appear
 
  
 
[[Alarm_Config_Settings|> Configure Tripwire Response]]
 
[[Alarm_Config_Settings|> Configure Tripwire Response]]
 
  
 
Click '''Apply''' to save the settings
 
Click '''Apply''' to save the settings

Revision as of 17:54, 29 October 2020

Video Instructions

Step by Step Instructions

1. From the Main Menu select AI

How To Setup Intrusion - NewUI - 1.jpg

2. Select Parameters on the left.

Select Smart Plan.

How To Setup Intrusion - NewUI - 2.jpg

3. Use the drop down box to select the Channel

How To Setup Intrusion - NewUI - 3.jpg

4. Click and highlight IVS (You may need to de-select any other options).

How To Setup Intrusion - NewUI - 4.jpg

The icon will highlight when selected.

Click Apply

How To Setup Intrusion - NewUI - 5.jpg

5. Click Parameters > IVS

How To Setup Intrusion - NewUI - 6.jpg

6. Use the drop-down box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

How To Setup Intrusion - NewUI - 7.jpg

7. The created rule will appear in the list

How To Setup Intrusion - NewUI - 8.jpg


9. Click the Pencil icon to draw the Tripwire rule

Tripwire Setup - NewGUI - 9.jpg

10. The Channel will fullscreen.

Left click anywhere inside the video frame to begin drawing the Trip line, then use the mouse to draw the trip line.

Right click to end drawing

Tripwire Setup - NewGUI - 10.jpg

Tripwire Setup - NewGUI - 11.jpg

11. The Tripwire menu will appear

Tripwire Setup - NewGUI - 12.jpg

  • Name: A name can be applied to the rule
  • Direction: Both, A To B, B To A

Click Tripwire Setup - NewGUI - Target Filter.jpg icon to set the Target Filter (maximum and minimum size size for Objects to follow rule)

Click Tripwire Setup - NewGUI - Trash Icon.jpg icon to clear the current rule

Once the tripwire rule settings have been created click OK

12. Click the Tripwire Setup - NewGUI - Trigger.jpg icon to set the Trigger settings when the IVS Tripwire rule is engaged.

Tripwire Setup - NewGUI - 13.jpg

> Configure Tripwire Response

Click Apply to save the settings



Video Instructions

Step By Step Instructions

1. From the Main Menu select AI

IVSTripwireSytemUINew1.png

2. Select Parameters on the left. Select Smart Plan. Select the camera channel at the top. Select and highlight IVS (You may need to de-select any other options). Select Apply

IVSTripwireSytemUINew2.png

3. Select IVS on the left. Then choose the channel number at the top and if the IVS will be done by the camera or by the recorder, by selecting either AI by Camera or AI by Device next to the channel number. Select Add at the bottom to create a new IVS alarm rule. Click on the drop-down menu under Type for the new rule you created and change set it to Tripwire. Select the Pencil icon under Draw

IVSTripwireSytemUINew3.png

4. Left click anywhere on the camera view to start the tripwire line. Left click anywhere else on the camera view to complete the segment of the line. Continue moving your mouse and left clicking to continue making multiple segments of the tripwire line.

When done drawing the line segments, right click to finish the line. Give this rule a name by selecting the text box next to Name and typing in a name.

Select the drop-down menu next to Direction to choose if the IVS alarm is triggered in both directions (Both) or just one direction ("A To B" or "B To A")

When you are done configuring the Tripwire rules, select OK

IVSTripwireSytemUINew4.png

6. Select the Gear icon under "Trigger" to configure what happens when the tripwire alarm is triggered:

> Configure Tripwire Response

Click Apply to save the settings