Thermal/DHI-ASI7213X-T1/Instructions/Mask Modes

Revision as of 17:53, 2 December 2022 by Andy (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Mask Modes

Description

This article is to show different type of mask mode and unlock mode.

Prerequisites

Video Instructions

Mask Modes

Main Menu > System > Face Parameters > Mask Modes

  • Not Detect - System will not check whether a person wearing a mask or not.
  • Mask Reminder - System will check whether a person wearing a mask or not. If the person is detected without wearing a mask, the system will prompt mask reminder and passage is allowed.
  • Mask Intercept - System will check whether a person wearing a mask or not. If the person is detected without wearing a mask, the system will prompt mask reminder and passage is NOT allowed. This mode can be in use when Unlock Mode is turn ON.

Unlock Mode

Main Menu > Access > Unlock Mode

Unlock Mode ON = Face Detection enabled
the need of identify people's face to open the door. Example scenario: Office, Factory, etc.

Temperature Monitoring Mode Only ON = Face Recognition disabled
only monitor human temperature, enabled for quick speed, 0.5s monitoring time interval for each person. Example scenario: Restaurant, Retail store, Amusement park, etc.