Difference between revisions of "Transmission Display Control/Network Video Decoder/DH NVD0405DH 4K"

(Specifications)
Line 29: Line 29:
 
*If your WebUI is not in English please flash this firmware: [https://dahuawiki.com/images/Firmware/Decoders/General_NVD0405DH-4K_Eng_N_V3.200.0001.0.R.20170306.zip Click Here to Download]
 
*If your WebUI is not in English please flash this firmware: [https://dahuawiki.com/images/Firmware/Decoders/General_NVD0405DH-4K_Eng_N_V3.200.0001.0.R.20170306.zip Click Here to Download]
  
 +
===Password Reset===
 +
* Press power button in front panel 3 times in 1 second. It will only reset password.
 +
* If press 5 times in 1 second, it will reset all the config settings in NVD.
  
 
===Specifications===
 
===Specifications===

Revision as of 15:43, 21 September 2022

DH-NVD0405DH-4K

DH-NVD0405DH-4K
Specifications Quick Start Guide Manual Firmware
Coming Soon
DH-NVD0405DH-4K.png

Features

Please Note: PTZ cameras can not be controlled via the NVD's interface. You will need either an NKB or a recorder to control an IP PTZ camera when being viewed through an NVD

  • H.265/H.264/MPEG-4 video decoding
  • 16 View Split per HDMI port
  • 4ch@12M/4ch@4K/16ch@1080P/64ch@D1 decoding ability
  • 1ch HDMI input, 4ch HDMI/VGA/BNC output, HDMI support Ultra HD 4K output
  • Support up to 4 video-wall display units, support configuration of 1*1,2*1,2*2
  • Support audio, alarm, bi-directional talk, RS485

Firmware

Password Reset

  • Press power button in front panel 3 times in 1 second. It will only reset password.
  • If press 5 times in 1 second, it will reset all the config settings in NVD.

Specifications