Video Intercom/SIP 2.0/How To Add VTO4202 To DSSPro Via Configtool
Contents
How To Add VTO4202 To DSSPro Via Configtool
Description
This article will go over DHI-VTO4202F setup to DSS Pro using Configtool
DSS Pro will be acting as the SIP server
Pre-requisites
- Initialized VDP Devices. Follow our guide here before continuing
- DSS Pro
- Configtool
Video Instructions
Step by Step Instructions
1. After all devices are initialized go to Building Config
2. Go to Global Parameter
3. Global Parameters
Global Parameters | |
---|---|
Center Number = 888888 | Sever Type = Express/Dss |
Server Address = Enter DSS Pro IP Address | Server Port = 5080 |
Server Username - Enter the Username used on DSS Pro | Server Password - Enter the Password for the DSS Pro User |
Sip Domain = VDP | Registered PWD = Leave Default |
VTO Username = Enter VTO Username | VTO Password = Enter VTO Password |
VTH Username = Enter VTH Username (admin by default) | VTH Password = Enter VTH Password |
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23
24.