Video Intercom/SIP 2.0/How To Add VTO4202 To DSSPro Via Configtool

Revision as of 22:20, 6 May 2021 by Marques.Phillips (talk | contribs) (Video Instructions)

How To Add DHI-VTO4202F-P-S2 To DSSPro Via Configtool

Description

This article will go over DHI-VTO4202F-P-S2 setup to DSS Pro using Configtool

DSS Pro will be acting as the SIP server

Pre-requisites

Video Instructions

Step by Step Instructions

Configurating VDP devices using Configtool

1. After all devices are initialized go to Building Config

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-1.png

2. Go to Global Parameter

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-2.png

3. Global Parameters

Global Parameters
Center Number = 888888 Sever Type = Express/Dss
Server Address = Enter DSS Pro IP Address Server Port = 5080
Server Username - Enter the Username used on DSS Pro Server Password - Enter the Password for the DSS Pro User
Sip Domain = VDP Registered PWD = Leave Default
VTO Username = Enter VTO Username VTO Password = Enter VTO Password
VTH Username = Enter VTH Username (admin by default) VTH Password = Enter VTH Password

Enter the proper information and click on OK to proceed

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-3.png

4. Click on Add Node to create a project

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-4.png

5. In this guide we have 1 VTO and 2 VTHs so we are checking the Main VTO and telling it we have 2 Rooms (VTHs) with 0 extensions. Click on OK

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-5.png

6. Associate the VTO's Serial Number to the Project's Main VTO Entry and click on Association

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-6.png

7. Do the same to the VTHs. Make sure to do them one at a time

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-7.png

8. After completing the Associations, click on Association List

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-8.png

9. Check all the devices and the select Config. Configtool will handle the rest of the configurations

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-9.png

10. Devices will reboot and the configuration is complete

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-10.png

Adding Devices to DSS Pro

1. Go to DSS Pro Web Manager Portal

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-11.png

2. Login to DSS Pro Web Manager

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-12.png

3. Go to Device

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-13.png

4. Click on Add

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-14.png

5. Select Video Intercom as Device Category and enter the correct login information

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-15.png

6. Give the device a name and click on OK to finish adding. Repeat steps 4-6 for all devices

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-16.png

7. Open a new tab if you get a Building Enable Error for the VTO

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-17.png

8. Go to the Video Intercom Management module

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-18.png

9. Disable Building Enable

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-19.png

20. Click on Save and confirm the popup

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-20.png

21. All devices should show Online now

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-21.png

DSS Pro Client

1. Open and login to DSS Client, Go to the Video Intercom Module

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-22.png

2. Go to Call Management Icon

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-23.png

3. and click on the refresh icon to make sure all the VDP devices populate.

How to Setup DHI-VTO4202F-P-S2 to DSS Pro-24.png