Thermal/DHI-ASI7213X-T1/Instructions/DSS Express/Face Recognition with High Temperature Alert with DHI-ASI7213X-T1 and DSS-Express
Contents
Face Recognition with High Temperature Alerts with DHI-ASI7213X-T1 and DSS Express
Description
This guide will show how to setup and use Facial Recognition with High Temperature Alerts on DSS Express with the DHI-ASI7213X-T1
Note:
- This configuration gives the ability to identify a person with high temperature readings in DSS Express.
- Temperature Reading will only work with registered users. Unregistered users like visitors will not be able to get a temperature reading in this configuration
- Each DHI-ASI7213X-T1 will use 1 x Face Recognition License on DSS Express
Quick Links:
How to set up DSS Express with Face Recognition & Temperature Monitoring
How to Review Temperature Reports
Prerequisites
- DHI-ASI7213X-T1 Setup
- DSS Express installed, with license
Video Instructions
Step by Step Instructions
Setup
These steps will cover the complete configuration of the device and software.
The prerequisite steps above for device and software setup must be complete before proceeding.
Set Kiosk To Unlock Mode
Enable Access Control for DHI-ASI7213X-T1
1. Tap on to access the main menu.
2. Login with your admin credential that you created during initialization process.
3. Main menu page will launch.
4. Select Access
5. Select Unlock Mode
6. Toggle the setting to On
Tap the arrow to return to the menu
Add DHI-ASI7213X-T1 to DSS Express
1. From the Homepage of DSS Express
Click Device
2. Click Add
3. Enter the device details:
- Device Name
- IP Address
- Username / Password
Click Add
4. The device will appear in the list
After a few moments the status will turn to Online
5. Click the pencil icon to edit the device settings
6. Click Video Channel
In the ChannelNumber field enter 1, then click inside the device settings, the Channel should appear in the list
Click the dropdown box under Features and enable the following:
- IVS Alarm
- IR Temperature Measurement
- Face Recognition
- Access Snapshot
7. Click AC Channel
8. Enter a name for the Door. Click OK
Configure Door / Access Settings of DHI-ASI7213X-T1 in DSS Express
1. From the Homepage of DSS Express
Click Config
2. Select the DHI-ASI7213X-T1 from the list in the left and expand until you find the Door, left click to select
3. Click Door Configuration
4. Configure the Unlock settings as desired, making sure to check the box to enable Face. Click OK to save
Configure Storage Settings of DSS Express
1. From the Homepage of DSS Express
Click Config
2. Click Storage
3. Local disks will be displayed
Click the edit icon next to the drive you wish to use
4. Enter the desired size of partition and select the type
Click the checkmark to Save
Repeat the process for each Storage type
A Video and General Picture partition must be created
The drive will be updated with the new partitions
You can click a partition to view/edit settings
Add High Temperature Alarm To Kiosk In DSS Express
From the main menu select Config
1. Select the DHI-ASI7213X-T1 from the list in the left and expand until you find the Door, left click to select
Click Event Configuration
2. Click the A & C Alarm section of the menu
3. Click High Temperature Abnormal
4. Click to toggle/enable the Alarm
5. Click Link Video
6. Select the DHI-ASI7213X-T1 from the list in the left
7. Click the layout options below the frame to select single channel
8. Click to drag and drop the video channel to the frame in the center of the screen
9. The channel is attached. It can be previewed or removed with the on screen buttons.
10. Check the box next to After alarm is triggered, camera snapshot
Click OK to save
High Temperature Event created:
Add User For Face Recognition
1. From the Homepage of DSS Express
Click Personnel Management
2. Click Add
3. Hover the mouse over the profile picture until the option appears for Upload Picture
4. Find the image and click Open
5. Cut/crop the photo as desired by clicking inside the frame to drag and crop
Click OK once complete
6. Enter a Unique ID for the user - Required
7. Enter any other desired User information
8. Click Authentication
9. Scroll down to find Face Comparison
Click Add
10. Find the image and click Open
Cut/crop the photo as desired by clicking inside the frame to drag and crop
Click OK once complete
11. Click Authorize
12. Select the DHI-ASI7213X-T1 from the list and expand until you find the Door, left click to select
Click OK to save
User Added:
Use Temperature Monitoring with Face Recognition in DSS Express
Temperature Monitoring
1. From the Homepage of DSS Express
Click Body Temp Monitoring
2. Click the device icon
3. Select the DHI-ASI7213X-T1 from the list. Click OK
4. Temperature Events will appear in this area:
Access
1. From the Homepage of DSS Express click Access Control
2. View of interface:
3. Access events can be reviewed on this screen
4. Click the eyeball icon under Operation to see details of the Access event
5. High Temperature events will also appear here:
Review High Temperature Reports
Temperature Monitoring
1. From the Homepage of DSS Express
Click Body Temp Monitoring
2. click Temp Report on the left side of the screen
3. Select the DHI-ASI7213X-T1 from the list in the left and expand until you find the Door, left click to select.
Enter parameters for the search, including the type of alert - for example High Temperature
Click Search
4. The search results will be displayed
5. Click the icon at the top to change the graph display style
Access Control
1. From the Homepage of DSS Express click Access Control
2. Click the Log on the left side of the screen
3. Enter parameters for the search, including Time and Temperature setting - for example High Temperature
Click Search
Search results displayed
Click the eye icon under Operate to see details of the event