Difference between revisions of "Access Control/How to Initialize DHI ASC2204C-S with Configtool"

(Prerequisites)
 
Line 13: Line 13:
  
 
[[file:How to change IP Address to DHI-ASC2204C-S-1.png|400px]]
 
[[file:How to change IP Address to DHI-ASC2204C-S-1.png|400px]]
 +
 +
2. Check the ASC2204C and click on '''Initialize'''
 +
 +
[[File:How to Initialize DHI-ASC2204C-S-1.png|900px]]
 +
 +
3. Click on '''Initialize''' again to continue
 +
 +
[[File:How to Initialize DHI-ASC2204C-S-2.png|900px]]
 +
 +
4. Enter a password and confirm it. The click on '''Next''' to proceed
 +
 +
[[File:How to Initialize DHI-ASC2204C-S-3.png|900px]]
 +
 +
5. Allow the initialization to complete then click on '''Finish'''
 +
 +
[[File:How to Initialize DHI-ASC2204C-S-4.png|900px]]
 +
 +
6. DHI-ASC2204C-S is now initialized
 +
 +
[[File:How to Initialize DHI-ASC2204C-S-5.png|900px]]

Latest revision as of 16:57, 3 December 2021

Description

This article will go over the initialization of the DHI-ASC2204C-S

Due to security of the system you will need to connect a PC/laptop directly to the DHI-ASC2204C-S in order for this process to go smoothly

Prerequisites

  • Laptop/PC directly connected to the DHI-ASC2204C-S
  • Configtool

Step by Step Instructions

1. First make sure your laptop/PC is under the same subnet as the controller.

How to change IP Address to DHI-ASC2204C-S-1.png

2. Check the ASC2204C and click on Initialize

How to Initialize DHI-ASC2204C-S-1.png

3. Click on Initialize again to continue

How to Initialize DHI-ASC2204C-S-2.png

4. Enter a password and confirm it. The click on Next to proceed

How to Initialize DHI-ASC2204C-S-3.png

5. Allow the initialization to complete then click on Finish

How to Initialize DHI-ASC2204C-S-4.png

6. DHI-ASC2204C-S is now initialized

How to Initialize DHI-ASC2204C-S-5.png