Doorbell/DB11/Format SDCard DB11
Revision as of 23:16, 12 February 2020 by Nicky Gunakan (talk | contribs) (Created page with "=Format SD Card information on DB11= ==Description== This article is to show how to format SD card information that inserted into DB11. ==Prerequisites== *DB11 that already...")
Format SD Card information on DB11
Description
This article is to show how to format SD card information that inserted into DB11.
Prerequisites
- DB11 that already initialized - How to do DB11 initial setup
- PC with SmartPSS Software
- SD Card
Instruction
SmartPSS
1. Locate your device IP address from ConfigTool.
2. Add your device to SmartPSS. Go to Devices > click on Add.
3. After device is successfully added to SmartPSS, click on Config button.
4. click on Storage to collapse the storage submenu. Click on HDD Manager.
