Difference between revisions of "Firmware/Update Camera Firmware via NVR"

(Prerequisites)
 
Line 76: Line 76:
  
 
[[File:webupgrade_wiki_6.png|600px]]
 
[[File:webupgrade_wiki_6.png|600px]]
 +
 +
 +
 +
[[Category:IP Camera]]
 +
 +
[[Category:Browser]]
 +
 +
[[Category:Firmware‏‎]]
 +
 +
[[Category:Firmware Update‏‎]]
 +
 +
[[Category:NVR]]

Latest revision as of 23:23, 11 August 2016

Update Camera Firmware via NVR

Prerequisites

  • Firmware for specific model
  • IP address of IP camera for upgrading firmware via WEB
  • Local Network access to the NVR
  • USB flash drive with firmware for local upgrade

Video Instructions

NVR

Internet Explorer

Step by Step Instructions via Local NVR

1. From the Main Menu under Settings, Select Camera.

Nvrcamupgrade 1.png

2. Select Registration.

Nvrcamupgrade 2.png

3. Select Upgrade.

Nvrcamupgrade 3.png

4. Select IP Camera to be upgraded

Nvrcamupgrade 4.png

5. Click "Select"

Nvrcamupgrade 5.png

6. Select the model specific firmware and click "OK".

Nvrcamupgrade 6.png

7. Click on "Start Upgrade"

Nvrcamupgrade 7.png

Status of the download will show.

Nvrcamupgrade 8.png

It will show "finish" when done.

Nvrcamupgrade 9.png

Step by Step Instructions via WEB

1. Login in IP Camera via Web

Webupgrade wiki 1.png

2. Click on the "Setup Tab".

Webupgrade wiki 7.png

3. On the left side menu, click on "System".

Webupgrade wiki 8.png

4. Click on "Upgrade".

Webupgrade wiki 9.png

5. Click on "Browse" and select the model specific firmware.

Webupgrade wiki 10.png

Webupgrade wiki 11.png

6. Once firmware is selected, click on upgrade.It will show a progress bar and device will reboot once upgraded.

Webupgrade wiki 6.png