Difference between revisions of "IPCSetStatic"

Latest revision as of 21:43, 26 June 2023

Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Please see, "How to Connect IP Camera to NVR"

1. Open a web browser and input the camera's IP address

4. Login to the camera's web interface

5. Click, "Setup"

6. Click, "Network"

7. Click, "TCP/IP"

8. Change Mode from, "DHCP" to "Static"

9. Input the IP address, subnet mask, Default Gateway, and primary and alternate DNS server.

10. Click, "Save"

@@ Line 1: / Line 1: @@
 ===How to Set IP Camera to Static===
 Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Please see, "[[ConnectIPCtoNVR|How to Connect IP Camera to NVR]]"
-[[file:ConfigToolIPC.jpg | 800px]]
-. Download and install ConfigTool from DahuaSecurity.com, under Support->Download Center->Software
+. Open a web browser and input the camera's IP address
-. Run the ConfigTool.
-. The ConfigTool should display your IP Camera's IP address. Click the, "[[file:ConfigToolIPCEIcon.jpg]]" icon to open Internet Explorer and access your IP Camera. Alternatively, you can input that IP address into your browser manually.
 [[file:IPCLoginPage.jpg|800px]]
-. Login with the default credentials:
+. Login to the camera's web interface
-User Name: admin
-Passsword: admin
 . Click, "Setup"