Difference between revisions of "IPCSetStatic"

 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
 
===How to Set IP Camera to Static===
 
===How to Set IP Camera to Static===
 
Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Please see, "[[ConnectIPCtoNVR|How to Connect IP Camera to NVR]]"
 
Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Please see, "[[ConnectIPCtoNVR|How to Connect IP Camera to NVR]]"
[[file:ConfigToolIPC.jpg | 800px]]
 
  
1. Download and install ConfigTool from DahuaSecurity.com, under Support->Download Center->Software
+
1. Open a web browser and input the camera's IP address
 
 
2. Run the ConfigTool.
 
 
 
3. The ConfigTool should display your IP Camera's IP address. Click the, "[[file:ConfigToolIPCEIcon.jpg]]" icon to open Internet Explorer and access your IP Camera. Alternatively, you can input that IP address into your browser manually.
 
  
 
[[file:IPCLoginPage.jpg|800px]]
 
[[file:IPCLoginPage.jpg|800px]]
  
4. Login with the default credentials:
+
4. Login to the camera's web interface
User Name: admin
 
Passsword: admin
 
  
 
5. Click, "Setup"
 
5. Click, "Setup"
Line 30: Line 23:
  
 
10. Click, "Save"
 
10. Click, "Save"
 +
 +
  
  
Line 35: Line 30:
  
 
[[Category:IP Camera]]
 
[[Category:IP Camera]]
 
 
[[Category:ConfigTool‏]]
 
[[Category:ConfigTool‏]]
 +
[[Category:How To]]

Latest revision as of 21:43, 26 June 2023

How to Set IP Camera to Static

Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Please see, "How to Connect IP Camera to NVR"

1. Open a web browser and input the camera's IP address

IPCLoginPage.jpg

4. Login to the camera's web interface

5. Click, "Setup"

6. Click, "Network"

IPCSidebarNetwork.jpg

7. Click, "TCP/IP"

8. Change Mode from, "DHCP" to "Static"

9. Input the IP address, subnet mask, Default Gateway, and primary and alternate DNS server.

IPCNetworkTCPIP.jpg

10. Click, "Save"