LincX2PRO/Recover Device via SD Card Firmware Flash
Recover Device via SD Card Firmware Flash
These instructions will show you how to recover a LincX2Pro device via SD-Card. These instructions should only be used if you are unable to setup your LincX2Pro device using normal methods.
- LincX2PRO Device
- Current LincX2PRO Device Firmware
- SD-Card Reader
Part 1:Prepare SD-Card
Part 2:Insert SD-Card & Flash
Part 3:Remove SD Card & Reset to Defaults
NOTE:Device should be showing a solid green light before proceeding with this step
Part 4:Setup Device with Mobile App
NOTE:Device should be showing a flashing green light before proceeding with this step
1. Navigate to https://dahuawiki.com/Main_Page on computer to download the firmware zip folder.