LincX2PRO/Setup Motion Detection
Contents
Description
This article will how to setup and configure the Motion Detection settings of a LincX2PRO device using the DMSS mobile app
Prerequisites
- LincX2PRO device setup and added to the mobile app DMSS
Step by Step Instructions
Step by Step Instructions
1. Launch DMSS Mobile App.
2. Tap on Home to access your added device list.
3. Select one of your added device that you wish to setup/modify Motion Detection Settings for. Tap on ... icon.
2. Select Device Details
3. Select Arming Settings
4. Toggle to enable Motion Detection
5. To adjust the region for Motion Detection -
Select Motion Detection Area
6. Use the on screen interface to select the region for Motion Detection - areas shaded in red will be active
Click the Save icon in the top right once finished
Select the back arrow
7. To adjust the sensitivity for Motion Detection -
Select Detection Sensitivity
Select a sensitivity value
Select Save
Select the back arrow
Settings will be savedMobile:iDMSS Plus & gDMSS Plus
Video Instructions
1. Select your LincX2PRO unit under the "Device" tab
2. Tap on Motion Detection Setting
3. Assure that the switch is enabled and select the Detection Sensitivity to configure the sensitivity
4. Save the desired settings and go back
5. Go back
6. Tap on Message
7. Select the Cloud icon to view the devices linked to your DMSS account and tap on the bell icon
8. Tap on your LincX2PRO device
9. Ensure that the switch is enabled and click on the Floppy Disk icon to save, go back
10. Go back again
11. Go to "Me"
12. Make sure that the Notification Switch is enabled and now you should receive Motion Detection notifications
