Mobile Solution/How To Enable Auto Register

Revision as of 03:19, 23 March 2022 by Nicky Gunakan (talk | contribs) (Prerequisites)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Description

This article will show how to enable Auto Register for a Dahua Mobile Recorder

After successfully auto registered, when the device is connected into the Internet, it will report the current location to the specified server to make it easier for the Client software to access the Device, and to preview and monitor it

Prerequisites

  • Dahua Mobile Recorder that connected to the network.
  • Access to local UI (mouse + monitor)

Step by Step Instructions

1. Log into the Recorder, access Main Menu

2. Go to Platform > Register > Enable

Toggle to enable

Mobile Recorder Auto Register 1.jpg

Configure the TCP/IP parameters, see below chart for details:

Mobile Recorder Auto Register 2.jpg

Click Apply to save all changes