NVR/Basic Setup/Initialize Dahua IP Camera via FLIR NVR POE

Revision as of 16:05, 27 February 2019 by Arran Williams (talk | contribs)

Initialize Dahua IP Camera via FLIR NVR POE

Description

  • How to locate and identify Dahua devices on LAN
  • Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Please see, "How to Connect IP Camera to NVR"

Prerequisites

  • ConfigTool 3.20
    ConfigTool download
  • Windows PC.
  • Physical Connection to Camera Port on the back of The NVR.

Step by Step Instructions

1. Launch ToolBox and run ConfigTool

Dhcpp1.png

2. Click Initialize

Dhcpp2.png

3. Select Device and Click Initialize

Dhcpp3.png

4. Create Password and Enter Password Recovery Email.

Dhcpp4.png

5. Select options for Easy4IP and update settings

Dhcpp5.png

6. Your device should now be activated

Dhcpp6.png

7. Select Edit and change IP to DHCP

Dhcpp7.png Dhcpp8.png

8. Your device should update to a usable IP address for your NVR

Dhcpp9.png