NVR/Recording Setup/Zero Channel

Revision as of 23:07, 2 November 2020 by Edward (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Setup Zero Channel

How to setup Zero Channel on Dahua NVR


Step 1: Please log into the DVR/NVR interface. NVRLogin.jpg

Step 2: Navigate to the System Menu NVRInterface.jpg

Step 3: Then go to the "Display" option NVRSystem.jpg

Step 4: Please look at the tabs at the top of the page and select "Zero Channel"


Step 5: You will be presented with some options to configure certain aspects of the

        Zero Channel stream such as Compression, Resolution, Frame Rate & Bit Rate


Please see the video below on Zero Channel configuration:


Zero Channel.gif



How to setup Zero Channel on Dahua Web Service


Step 1: Setup Tab → System → Display. Zero channel 1.png


Step 2: Zero-Channel → Check "Enable" → Click "Save". Zero channel 2.png