PTZ/Instructions/Light Wiper

Revision as of 22:42, 1 April 2021 by Marques.Phillips (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Light Wiper

Description

It is to set wiper mode, enable time, stop time, interval, wiper control etc.

Instructions

Icon for type SystemUI Old.pngSystemUI Old

Description

This article will cover how to enable the PTZ Light & Wiper functions via the System UI with the Old GUI

Prerequisites

  • Dahua PTZ with Light and/or Wiper function(s)
  • Dahua Recorder with the Old GUI, connected to a TV or Monitor

Video Instructions

Step by Step Instructions

1. Select the PTZ camera's channel live view on the main screen of the recorder. (A green box should appear around the live view of that camera)
Right-click and select "PTZ" from the drop-down menu

PTZLightWiperSystemUIOld1.png

2. Click the arrow pointing right on the right-hand side of the PTZ control window

PTZLightWiperSystemUIOld2.png

3. Select the AUX icon on the right, that looks like a Lightbulb

PTZLightWiperSystemUIOld3.png

4. Click the drop-down menu under Direct Aux and select either "Light" or "Wiper" depending on the fuction you want to enable (Certain PTZ cameras have either a light, a wiper, or both)

PTZLightWiperSystemUIOld4.png

5. Select the "On" button on the right to enable the Light or Wiper function.
The Light or Wiper will stay activated.
Select the "Off" button to disable the Light or Wiper when you are done

PTZLightWiperSystemUIOld5.png

Icon for type SystemUI New.pngSystemUI New

How to Use PTZ Light Wiper

Description

The Light Wiper feature allows a PTZ equipped with a Wiper to remotely clear moisture from the lens.

This guide will show how to use the PTZ Light Wiper in the System UI (New)

Prerequisites

  • Dahua Network PTZ (with Light Wiper function)

Video Instructions

Step by Step Instructions

1. From Live View right click to open the menu

Select PTZ

Light Wiper - System UI New - 1.jpg

2. Click the arrow to expand the PTZ menu

Light Wiper - System UI New - 2.jpg

3. Click the AUX icon

Light Wiper - System UI New - 3.jpg

4. Use the dropdown box to select Wiper

Light Wiper - System UI New - 4.jpg

5. Click On to begin Light Wiper function

Light Wiper - System UI New - 5.jpg

6. Click Off to stop Light Wiper function

Light Wiper - System UI New - 6.jpg

Icon for type WebUI Old.pngWebUI Old

How to Use PTZ Light Wiper

Description

The Light Wiper feature allows a PTZ equipped with a Wiper to remotely clear moisture from the lens.

This guide will show how to use the PTZ Light Wiper in the WebUI (Old)

Prerequisites

  • Dahua Network PTZ (with Light Wiper function)

Video Instructions

Step by Step Instructions

1. Log into the camera's web interface

From Live View

Above the main screen click the PTZ Light Wiper icon

PTZLightWiper - WebUI Old - 1.jpg

2. The PTZ LightWiper interface will expand

Click Once - the wiper will move a single time

PTZLightWiper - WebUI Old - 2.jpg

3. Click Start to begin continuous wiper movement

PTZLightWiper - WebUI Old - 3.jpg

4. Click Stop to stop the wiper movement

PTZLightWiper - WebUI Old - 4.jpg

Icon for type WebUI New.pngWebUI New

Description

This article will cover how to enable the PTZ Light & Wiper functions via the Web UI with the New GUI

Prerequisites

  • Dahua PTZ with Light and/or Wiper function(s)
  • Dahua Recorder with the New GUI on the same network as a Mac or Windows PC

Video Instructions

Step by Step Instructions

1. Log into the web interface of recorder that has the PTZ added to it and go to the Live section from the Main Menu.
Open the live view of the PTZ camera.
Select "PTZ Setup" in the PTZ section on the right.
Click the drop-down menu and select either "Wiper" or "Light" (Certain PTZ cameras have either a light, a wiper, or both)

PTZLightWiperWebUINew1.png

2. Select the "On" button on the right to enable the Light or Wiper function.
The Light or Wiper will stay activated.
Select the "Off" button to disable the Light or Wiper when you are done

PTZLightWiperWebUINew2.png

Icon for type SmartPSS.pngSmartPSS

=SmartPSS Light Wiper=

Prerequisites

  • Dahua PTZ with Light and/or Wiper function(s)
  • Dahua PTZ added to SmartPSS

Video Instructions

Step by Step Instructions

1. Make sure the PTZ camera is added to SmartPSS

SPSS Light Wiper-1.png

2. Open a new tab and select the Live Preview

SPSS Light Wiper-2.png

3. Select the PTZ and open the PTZ tab

SPSS Light Wiper-3.png

4. Go to More Functions and search for "Wiper" on the drop-down menu

SPSS Light Wiper-4.png

5. Click on the power icon and that should enable the wiper

SPSS Light Wiper-5.png

Icon for type DSS Express S.pngDSS Express

==DSS Express S PTZ Wiper==

Prerequisites

  • Dahua PTZ with Light and/or Wiper function(s)
  • Dahua PTZ added to DSS Express S

Video Instructions

Step by Step Instructions

1. Open the live view of the PTZ camera an select the "More Funtions" icon on the bottom PTZ tab

DSS-E-S Light Wiper-1.png

2. Click on the Three Dotted "Other" icon

DSS-E-S Light Wiper-2.png

3. Select the Wiper icon and that will enable the Light Wiper

DSS-E-S Light Wiper-3.png

IDMSS Plus Icon2.jpgMobile:iDMSS Plus & gDMSS Plus

=DMSS MobileUI Light Wiper=
 NOTE: The Mobile DSS app will only support the Light Wiper if connected directly to the camera via IP/P2P. Wiper commands through the NVR/XVR is not supported as of yet. Support will be added in an upcoming update.

Prerequisites

  • Dahua PTZ with Light and/or Wiper function(s)
  • DMSS Plus with PTZ added via IP/P2P

Video Instructions

Step by Step Instructions

1. Go to live view on DMSS and click on the "+"

DMSS Wiper-1.png

2. Select the PTZ camera

DMSS Wiper-2.png

3. On the bottom bar select the Wiper icon

DMSS Wiper-3.png

4. Select the Icon below to activate the wiper once.

DMSS Wiper-4.png

5. Select the interval (Seconds) you want the wiper to activate continuously.

DMSS Wiper-5.png