PTZ/SmartPSS 1.16/Preset

From Dahua Wiki

Revision as of 22:29, 20 November 2017 by Qi Chen (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

How to Set A Preset in SmartPSS 1.16

Description

Pre-sets are used to define single or multiple locations that are saved to the camera's internal memory. Pre-Sets are used in conjunction with the, "Tour" feature.

Prerequisites

  • Dahua Network PTZ
  • IP Address of Network PTZ
  • SmartPSS 1.16
  • PTZ added to SmartPSS Device List

Video Instructions

Step by Step Instructions

1. Launch SmartPSS.

PTZ Scan SmartPSS1.16 1.png

2. Click, "Liveview"

PTZ Scan SmartPSS1.16 2.png

3. Double click the PTZ on the device list on the left, and click the box on the lower left to bring the PTZ up full screen.

PTZ Scan SmartPSS1.16 3.png

4. Click, "More Functions" in the lower left.

PTZ Scan SmartPSS1.16 4.png

5. Click the drop down list, and select, "Preset"

PTZ Scan SmartPSS1.16 5.png

6. Click the, "Gear" icon.

PTZ Preset SmartPSS1.16 1.png

7. Use the arrow keys to establish where you wish to set a preset.

PTZ Preset SmartPSS1.16 2.png

8. Input the preset number you wish to establish.

PTZ Preset SmartPSS1.16 3.png

9. Click the, "Check" to save the preset.

PTZ Preset SmartPSS1.16 4.png

10. To move the PTZ to the established preset, input the preset number, and click the, "Goto" icon.

PTZ Preset SmartPSS1.16 5.png