Product/Point to Point/Instructions/How to Reset Dahua V-Radio Wireless Bridge using Reset Tool

Revision as of 17:29, 8 October 2019 by Marques.Phillips (talk | contribs) (Step by Step Instructions)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How to Reset Dahua V-Radio Wireless Bridge Using Reset Tool

Description

These instructions will show you how to reset a Dahua Wireless Bridge using the reset tool. Upon completion of these instructions, your wireless bridge will be at the following:

  • Default IP: 192.168.1.36
  • User Name: admin
  • Password: admin

Prerequisites

Wireless Bridge L1.png
  • DH-PFWB2-60n
  • DH-PFWB2-30n
  • DH-PFWB2-90n
  • DH-PFWB5-30n
  • DH-PFWB5-10n
  • DH-PFWB5-90n
  • DH-PFWB5-30ac
  • DH-PFWB5-10ac
  • DH-PFWB5-90ac
  • Wireless Bridge Serial Number
  • A laptop or PC directly connected to the Wireless Bridge's POE injector
  • JRE - Java Runtime Environment. You can find "jre-8u171-windows-i586.exe" in the zip file

Video Instructions

Step by Step Instructions

1. Connect the wireless bridge and computer as seen below

Wireless Bridge L1.png

2. Right click the network icon in the taskbar on the computer

Select "Open Network and Sharing Center"

Reset Wireless Bridge - Network Setup 1.jpg

3. Click "Change adapter settings" on the left side of the screen

Reset Wireless Bridge - Network Setup 2.jpg

4. Select the network adapter that is connected to the device

Reset Wireless Bridge - Network Setup 3.jpg

5. Right click, select Properties

Reset Wireless Bridge - Network Setup 4.jpg

5. Select 'Internet Protocol Version 4 (TCP/IPv4) in the list then click "Properties" button

Reset Wireless Bridge - Network Setup 5.jpg

6. Select "Use the following IP address" then enter a static IP for the computer that will match the wireless device once it is reset

Reset Wireless Bridge - Network Setup 6.jpg

For this guide we will set the computer to the following information in Internet Protocol Version 4 (TCP/IPv4) Properties:

  • IP address: 192.168.1.20
  • Subnet mask: 255.255.255.0
  • Default gateway: 192.168.1.1

7. Open Reset Tool by clicking Reset Tool. jar

Reset Wireless Bridge - Reset Tool 1.jpg

8. The Status will show "Ready"

Reset Wireless Bridge - Reset Tool 2.jpg

9. With the Reset Tool open on the computer, reboot the wireless bridge (power off/on). The Reset Tool will scan for the wireless bridge automatically

Reset Wireless Bridge - Reset Tool 3.jpg

10. Click "Reset" to begin the reset process

Reset Wireless Bridge - Reset Tool 4.jpg

11. The Reset Tool will attempt to connect to the device

Reset Wireless Bridge - Reset Tool 5.jpg

12. The Enter PIN code prompt will appear. The PIN code will be the last 4 numbers of the S/N (serial number) which can be found on the actual device.

Reset Wireless Bridge - Reset Tool 6.jpg

13. At the Enter PIN code prompt, enter the last 4 numbers of the Serial Number for the device then click Enter

Note: You must finish all steps of the Reset function within 60s or you have to reboot the device and attempt again.

Reset Wireless Bridge - Reset Tool 7.jpg

14. After entering the PIN code the wireless bridge will be reset to factory default settings

Reset Wireless Bridge - Reset Tool 8.jpg

  • Default IP: 192.168.1.36
  • User Name: admin
  • Password: admin