Difference between revisions of "Record/Basic/Alarm"

From Dahua Wiki

< Record‎ | Basic
Jump to: navigation, search
(Description)
(Physical Setup Instructions)
 
(One intermediate revision by the same user not shown)
Line 2: Line 2:
 
==Description==
 
==Description==
 
This feature will allow you to specify a range of time for a Dahua device to record when a physical alarm is triggered.
 
This feature will allow you to specify a range of time for a Dahua device to record when a physical alarm is triggered.
 +
==Physical Setup Instructions==
 +
<div class="toccolours mw-collapsible mw-collapsed">
 +
[[File:PhysicalAlarmRecordSetup1Large.JPG|250px]]<span style="font-size:180%;">'''Door Sensor'''</span>
 +
<div class="mw-collapsible-content">{{Template:Alarm_Record_Physical_Alarm}}</div>
 +
</div>
  
 
==Instructions==
 
==Instructions==

Latest revision as of 22:20, 15 January 2020

Alarm Record

Description

This feature will allow you to specify a range of time for a Dahua device to record when a physical alarm is triggered.

Physical Setup Instructions

PhysicalAlarmRecordSetup1Large.JPGDoor Sensor

How to Setup Alarm Recording Using A Physical Alarm

Description

Connect a physical alarm in conjunction to work with Dahua recording devices.

Prerequisites

  • A NVR or IP Camera with an Alarm Out

PhysicalAlarmRecordSetup8Large.JPG

  • A low voltage physical alarm

PhysicalAlarmRecordSetup1Large.JPG

  • Dual pair 24 gauge run to the physical alarm

PhysicalAlarmRecordSetup15Large.JPG

  • Alarm block

PhysicalAlarmRecordSetup6Large.JPG

Video Instructions

Step by Step Instructions

1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1"

PhysicalAlarmRecordSetup14.JPG

2. Connect the cable to your physical alarm.

PhysicalAlarmRecordSetup9Large.JPG->PhysicalAlarmRecordSetup10Large.JPG

3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground"

PhysicalAlarmRecordSetup11Large.JPG

4. Login to the NVR, and click, "Setup"

AlarmRecordSetup1.png

5. Click, "Event"

AlarmRecordSetup2.png

6. Click, "Alarm"

AlarmRecordSetup3.png

7. Select the Channel, and enable, "Local Alarm"

AlarmRecordSetup4.png

8. Select either, "NO" or "NC"

AlarmRecordSetup5.png

9. Next select what actions you want the system to perform, when the alarm is activated.

AlarmRecordSetup6.png

10. Click, "OK"

AlarmRecordSetup7.png

Links

Related Articles in Category:Record

Extension:DynamicPageList (DPL), version 3.0.12: Error: No results!

Extension:DynamicPageList (DPL), version 3.0.12: Error: No results!

Instructions

Icon for type SystemUI Old.pngSystemUI Old

Description

This article is to show you instruction of how to wire and setup the alarm input from the recorder.

Prerequisites

1. NVR/HCVR/DVR with Alarm IN relay functionality

2. Alarm input device. Such as: Toggle switch or motion sensor.

3. Power supply unit rated for the Electronic Buzzer (and the NVR/HCVR/DVR)

Video Tutorial

Step by Step Instructions

Please Note: Setting up alarm triggers will only work with recorders that have alarm inputs.

STEP 1. Identify the connections on the Alarm Trigger.

physical alarm pic 1.png

  • COM: Communication Port or Ground N.C: Normally Closed - A Trigger that initiates when an object disrupts the communication line of 2 sensors
  • N.C: Normally Closed - A Trigger that initiates when an object disrupts the communication line of 2 sensors
  • N.O: Normally Open - A Trigger that initiates when an object completes the communication line of 2 sensors.


STEP 2. Connect the N.C. (Normally Closed) wire to one of the numbered ports. Connect the COM wire to the COM / Ground Port.

  • Alarm Inputs are grouped in fours.
  • Each group uses the Communication/Ground Port on the right. Alarm Inputs are grouped in fours. Each group uses the Communication/Ground Port on the right.

physical alarm 2.png


STEP 3. From your local GUI, right click on your live view screen and click on Main Menu.

alarm pic 3.png


STEP 4.Click Event from the Settings menu option.

physical alarm pic 4.png


STEP 5. From the left menu tab, click Alarm.

physical alarm pic 5.png


STEP 6. Click on Local Alarm tab.

physical alarm pic 6.png


STEP 7. Select the Alarm In Port you connected from Step 2.

physical alarm pic 7.png


STEP 8. Select alarm trigger Type

  • Normally Closed: A Trigger that initiates when an object disrupts the communication line of 2 sensors.
  • Normally Open: A Trigger that initiates when an object completes the communication line of 2 sensors.

physical alarm pic 8.png


STEP 9. Configure the Alarm Trigger Settings

  • Show Message: An alert will appear on the display attached to the system when the alarm is triggered.
  • Record Channel: Configure the alarm to trigger recording on a specific channel, or all.
  • Snapshot: A Snapshot will be taken by a specific channel or all when the alarm is triggered.

physical alarm 9.png


STEP 10. Click Apply.

physical alarm pic 10.png


STEP 11. Click OK

  • If you configured the Alarm to "Show a Message", it will appear as soon as the alarm is triggered.

physical alarm pic 11.png

  • Right-Click your mouse once to clear the message.
physical alarm pic 12.png

Icon for type SystemUI New.pngSystemUI New

Description

Prerequisites

Video Instructions

==Step by Step Instructions==

Icon for type WebUI Old.pngWebUI Old

Description

Connect a physical alarm in conjunction to work with Dahua recording devices.

Prerequisites

  • A NVR or IP Camera with an Alarm Out

PhysicalAlarmRecordSetup8Large.JPG

  • A low voltage physical alarm

PhysicalAlarmRecordSetup1Large.JPG

  • Dual pair 24 gauge run to the physical alarm

PhysicalAlarmRecordSetup15Large.JPG

  • Alarm block

PhysicalAlarmRecordSetup6Large.JPG

Video Instructions

Step by Step Instructions

1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1"

PhysicalAlarmRecordSetup14.JPG

2. Connect the cable to your physical alarm.

PhysicalAlarmRecordSetup9Large.JPG->PhysicalAlarmRecordSetup10Large.JPG

3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground"

PhysicalAlarmRecordSetup11Large.JPG

4. Login to the NVR, and click, "Setup"

AlarmRecordSetup1.png

5. Click, "Event"

AlarmRecordSetup2.png

6. Click, "Alarm"

AlarmRecordSetup3.png

7. Select the Channel, and enable, "Local Alarm"

AlarmRecordSetup4.png

8. Select either, "NO" or "NC"

AlarmRecordSetup5.png

9. Next select what actions you want the system to perform, when the alarm is activated.

AlarmRecordSetup6.png

10. Click, "OK"

AlarmRecordSetup7.png

Icon for type WebUI New.pngWebUI New

Description

This article is to show you how to setup alarm recording thru new Web GUI.

Note: please refer to product spec sheet for alarm input/output availability. Not all Dahua Recorder support alarm input/output.

Prerequisites

Video Instructions

Step by Step Instructions

Setup Alarm Input

From main menu, click on Alarm. Click on Alarm input. We are using XVR 72 series for this example. The Alarm Input page will launch as shown below:

AlarmInput1.PNG

Select the Alarm input number that you like to use. This number is correspond to the alarm port on the back of recorder.

1. Click Enable to enable the alarm input.

2. Enter Alarm Name. By default is set to AlarmIn#

3. Period is to schedule your Alarm when you want to be enable.

4. With the alarm input, you can trigger recorder's alarm output.

5. This to select which channel you want recorder to start recording when alarm is triggered.

6. You can call basic PTZ action Preset, Tour, or Pattern when alarm is triggered.


Setup Alarm Recording Schedule

1. From the main menu, click on Management > Storage > Schedule.

NewUIRecording.jpg

2. Select the channel you like to setup.

AlarmRecordChannel.PNG

3. To enable Alarm recording, Click on Setting next to the timeline bar.

4. Set your duration (By default is 24 hour, 00-24). Then select Alarm.

You can select all days to copy the schedule to all week. Click Save.

AlarmSchedule.PNG

5. Click Save.

AlarmSchedule2.PNG

Icon for type SmartPSS.pngSmartPSS

Description

How to Setup Alarm Recording Using A Physical Alarm via SmartPSS 2.0

Prerequisites

  • A NVR or IP Camera with an Alarm Out

PhysicalAlarmRecordSetup8Large.JPG

  • A low voltage physical alarm

PhysicalAlarmRecordSetup1Large.JPG

  • Dual pair 24 gauge run to the physical alarm

PhysicalAlarmRecordSetup15Large.JPG

  • Alarm block

PhysicalAlarmRecordSetup6Large.JPG

Video Instructions

Step by Step Instructions

1. Identify which alarm out block you wish to use to connect your physical alarm. For this example we are going to use, "Alarm Out Channel 1"

PhysicalAlarmRecordSetup14.JPG

2. Connect the cable to your physical alarm.

PhysicalAlarmRecordSetup9Large.JPGPhysicalAlarmRecordSetup10Large.JPG

3. Connect the cable to the alarm block on the ports labeled, "IN1" and "Ground"

PhysicalAlarmRecordSetup11Large.JPG

4. Log into SmartPSS -> Select "Device Configuration" from the home page.

alarmsmartpss2 0.png

alarmsmartpss2 01.png

5.From the left hand side select device -> Expand Event -> Select Alarm I/O

alarmsmartpss2 02.png

6.Check mark Alarm Input Enable -> Select channel.

alarmsmartpss2 03.png

7.Select either, "Always Open" or "Always Close"

alarmsmartpss2 04.png

8.Next select what actions you want the system to perform, when the alarm is activated. To record the alarm event you will need to check mark "record channel".

alarmsmartpss2 05.png

9.Select Apply and Save to save settings.

alarmsmartpss2 06.png

10.Next you will need to set the schedule to record the alarm event. Select Storage -> Schedule.

alarmsmartpss2 07.png

11.Select Channel Alarm recording was set for -> Select the gear icon -> Here you will see Period 1 (By default it will be set 0-24 hours). For this tutorial we are setting 1 Period -> Check mark "Alarm" -> Check mark "all" to record everyday of the week.

alarmsmartpss2 08.png

alarmsmartpss2 09.png

12.Here on the schedule you should see red for each day of the week as pictured below. Select apply and save to save settings.

alarmsmartpss2 10.png

DSS Mobile2 Icon.jpgDSS4004-S2 & DSS7016-S2

iDMSS Plus Icon2.jpgMobile:iDMSS Plus & gDMSS Plus