Software/Dahua Toolbox/VDPConfig/Upgrade Firmware

Revision as of 18:07, 10 June 2019 by Marques.Phillips (talk | contribs)

How To Upgrade Firmware In VDPConfig

Description

This guide will show you how to upgrade the firmware of a device using VDPConfig

Prerequisites

Step by Step Instructions

1. Open DahuaToolbox and click Open next to VDPConfig


Upgrade Firmware - VDPConfig - 1.jpg

2. Click the Upgrade icon on the left (Arrow)

Upgrade Firmware - VDPConfig - 2.jpg

3. Click Search Setting

Upgrade Firmware - VDPConfig - 3.jpg

4. Enter the password for the device then click OK

Upgrade Firmware - VDPConfig - 4.jpg

The window may refresh after entering a password

5. Check the box next to the device you wish to upgrade then click Browser to locate the firmware file

Upgrade Firmware - VDPConfig - 5.jpg

6. Use the window that appears to locate the firmware file

Upgrade Firmware - VDPConfig - 6.jpg

7. Click Upgrade

Upgrade Firmware - VDPConfig - 7.jpg

8. Upgrade Setup window will appear

Set Upgrade Type to Main Program Clear Config must be enabled.

Check the box next Clear Config then click OK to begin the upgrade


Upgrade Firmware - VDPConfig - 8.jpg

9. The upgrade status will display via a progress bar

Upgrade Firmware - VDPConfig - 9.jpg

Upgrade Firmware - VDPConfig - 10.jpg


When the firmware upgrade is complete a green checkmark will appear next to the device

Upgrade Firmware - VDPConfig - 11.jpg