Template:Audio Record Physical Setup

Revision as of 23:54, 11 February 2020 by AlexS (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Prerequisites

  • Dahua Camera with Audio Input
  • Powered Microphone (In this guide we use the Dahua HAP200 Hi-fidelity Pickup)
  • RCA Cable
  • Power Supply for the Microphone (Check the Microphone's Spec Sheet for exact Power Supply)

Overview

AudioRecordingPhysicalSetup2.jpg

Step by Step Instructions

1. Connect one end of the RCA cable to the "Audio In" port on the Camera's wire harness/pigtail

AudioRecordingPhysicalSetup3.jpg

2. Connect the other end of the RCA cable to the "Audio" output port on the Powered Microphone's wire harness/pigtail

AudioRecordingPhysicalSetup4.jpg

3. Connect the Power Supply to the "Power" connection on the Powered Microphone's wire harness/pigtail

AudioRecordingPhysicalSetup5.jpg

4. When you have finished, it should look similiar to this setup:

AudioRecordingPhysicalSetup2.jpg

Retrieved from "https://DahuaWiki.com/index.php?title=Template:Audio_Record_Physical_Setup&oldid=54760"