Template:Product Point to Point

Revision as of 17:33, 27 October 2021 by Edward (talk | contribs)

Wireless Point to Point

Models Image Description Info Specifications Manual EOL
DHI-PFWB5-10n DHI PFWB5 10n Web.png Access Point
  • Integrated 5 GHz (2 x 2) MIMO Radio
  • Recommended for up to 3.11 miles (5 km) PTP/PTMP Wireless Connection (as a station in PTMP link)
  • Frequency 5.150 – 5.850 GHz (FCC 5.150 to 5.250 and 5.725 to 5.850 GHz)
No
DHI-PFWB5-90n DHI PFWB5 90n Web.png Station
  • Integrated 5 GHz (2 x 2) MIMO Radio
  • Recommended as a Base Station for 3.11 miles (5 km) PTMP Wireless Connection
  • Frequency 5.150 – 5.850 GHz (FCC 5.150 to 5.250 and 5.725 to 5.850 GHz)
No

Models Image Description Specifications Manual EOL
DH-PFM880 PFM880.png Wireless Base Station
Yes
DH-PFM881 PFM881.png Wireless Video Transmission Device
Yes

NOTE

  • DO NOT MIX GENERATION 1 and GENERATION 2 DEVICES!
  • Access point broadcasts the SSID, and the base station(s) connect to the access point.

Networking Mode

Point to Point Point To Point Network Diagram.png
Point to Multipoint Point To Multipoint Network Diagram.png

Information

  • 192.168.1.36 is default IP
  • Default User Name = admin
  • Default Password = admin
  • DHI-PFWB5-10n-Station, square unit, satellite
  • DHI-PFWB5-90n-Access Point, long skinny unit, Home Base

Operating Modes

802.11n:

  • Access Point (autoWDS),
  • Access Point (TDMA 2)
  • Access Point (TDMA 3)
  • Station (WDS/TDMA 2/TDMA 3)
  • Station (ARPNAT)

802.11ac:

  • Access Point (autoWDS)
  • Access Point (TDMA3)
  • Station (WDS/TDMA 3)

How to reset the DH-PFWB5-10n and DH-PFWB5-90n

  • Make sure the unit is connected to the POE unit that is included in the package.

WL POE.JPG

  • Press the reset button for 15 seconds. You will see the LED on the side of the device flash.

Reset1.jpg Reset2.jpg

Video Instructions for Wireless Transmission Device DH-PFWB5-10n

Step by Step Instruction for Wireless Transmission Device DH-PFWB5-10n

  • It is best to setup these devices on a bench before installing them.
  • Power on and Configure one device at a time, they all have the same default IP address.
  • Always use the included POE injector on all configurations.
  • What is in the BOX - DH-PFWB5-10n.

PFWB5-1.JPG PFWB5-2.JPG PFWB5-3.JPG PFWB5-4.JPG



  • 1. Give your PC a IP address of 192.168.1.200
  • 2. Connect to the DH-PFWB5-10n to your PC using a patch cable.
  • 3. ping the IP address of the DH-PFWB5-10n (192.168.1.36) to make sure it is alive.
  • 4. Using IE or Chrome type the IP address on a browser.
  • 5. Login screen.

Login.PNG

  • 6 Main Menu

1 WL config.PNG

  • Setup, Wireless Configuration.
  • 7. Enable the radio button.
  • 8. Operation Mode "Station (WDS/TDMA 2/TDMA 3)"
  • 9. Wireless Station Settings, SSID and Security.

2 WL Settings.PNG

  • 10. Network Configuration, Bridge mode
  • 11. Assigned a static IP, DNS and Subnet mask.

3 Network config.PNG

  • 12. Information Screen.
  • 13. Here you can see that the device is online, SSID, IP.

Information.PNG

  • Congratulation your device is online.

Video Instructions for Wireless Transmission Device DH-PFWB5-90n

Step by Step Instruction for Wireless Transmission Device DH-PFWB5-90n

  • It is best to setup these devices on a bench before installing them.
  • Power on and Configure one device at a time, they all have the same default IP address.
  • Always use the included POE injector on all configurations.
  • What is in the BOX - DH-PFWB5-90n.

PFWB5-1-90N.JPG PFWB5-2- 90N.JPG PFWB5-3- 90N.JPG PFWB5-4- 90N.JPG



  • 1. Give your PC a IP address of 192.168.1.200
  • 2. Connect to the DH-PFWB5-90n to your PC using a patch cable.
  • 3. ping the IP address of the DH-PFWB5-90n (192.168.1.36) to make sure it is alive.
  • 4. Using IE or Chrome type the IP address on a browser.
  • 5. Login screen.

Login.PNG

  • 6 Main Menu

1a Info90.PNG

  • Setup, Wireless Configuration.
  • 7. Enable the radio button.
  • 8. Operation Mode "Access Point (WDS/TDMA 2/TDMA 3)"
  • 9. Wireless Station Settings, SSID and Security.

4 WL SSID90.PNG

  • 10. Network Configuration, Bridge mode
  • 11. Assigned a static IP, DNS and Subnet mask.

Network90.PNG

  • 12. Information Screen.
  • 13. Here you can see that the device is online, SSID, IP.

1a Info90.PNG

  • Congratulation your device is online.

Instructions