Template:Tripwire SystemUI NewGUI

Revision as of 17:55, 29 October 2020 by Marques.Phillips (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Video Instructions

Step by Step Instructions

1. From the Main Menu select AI

How To Setup Intrusion - NewUI - 1.jpg

2. Select Parameters on the left.

Select Smart Plan.

How To Setup Intrusion - NewUI - 2.jpg

3. Use the drop down box to select the Channel

How To Setup Intrusion - NewUI - 3.jpg

4. Click and highlight IVS (You may need to de-select any other options).

How To Setup Intrusion - NewUI - 4.jpg

The icon will highlight when selected.

Click Apply

How To Setup Intrusion - NewUI - 5.jpg

5. Click Parameters > IVS

How To Setup Intrusion - NewUI - 6.jpg

6. Use the drop-down box to select the Channel

Then click Add in the lower right side of the screen to Add an IVS rule

How To Setup Intrusion - NewUI - 7.jpg

7. The created rule will appear in the list

How To Setup Intrusion - NewUI - 8.jpg


9. Click the Pencil icon to draw the Tripwire rule

Tripwire Setup - NewGUI - 9.jpg

10. The Channel will fullscreen.

Left click anywhere inside the video frame to begin drawing the Trip line, then use the mouse to draw the trip line.

Right click to end drawing

Tripwire Setup - NewGUI - 10.jpg

Tripwire Setup - NewGUI - 11.jpg

11. The Tripwire menu will appear

Tripwire Setup - NewGUI - 12.jpg

  • Name: A name can be applied to the rule
  • Direction: Both, A To B, B To A

Click Tripwire Setup - NewGUI - Target Filter.jpg icon to set the Target Filter (maximum and minimum size size for Objects to follow rule)

Click Tripwire Setup - NewGUI - Trash Icon.jpg icon to clear the current rule

Once the tripwire rule settings have been created click OK

12. Click the Tripwire Setup - NewGUI - Trigger.jpg icon to set the Trigger settings when the IVS Tripwire rule is engaged.

Tripwire Setup - NewGUI - 13.jpg

> Configure Tripwire Response

Click Apply to save the settings