View source for Thermal/How To Enable Human Attributes

==Description==
This article will go over two types Human Attributes that can be enabled on the NVR's Local UI for AI Statistics

1. Human Attributes with Mask Alerts turned ON<br />
2. Human Attributes with Mask Alerts turned OFF

 '''The Human Attributes Stamps are only visible through the NVR's Local Display'''

==Human Attributes with Mask Alerts turned ON==
===Video Instructions===
<embedvideo service="youtube">https://youtu.be/XaFo0NFa0x4</embedvideo>

===Step by Step Instructions===
1. Login to the recorder's UI

[[File:How to Enable Human Attributes With Mask Alerts-1.png|800px]]

2. Go to the AI tab

[[File:How to Enable Human Attributes With Mask Alerts-2.png|800px]]

3. Navigate to:

- Parameters>Face detection<br />
- Under "Alarm Type" switch it from Regular to Mask Detect<br /> 

[[File:How to Enable Human Attributes With Mask Alerts-3.png|800px]]

4. Once that is switched to Mask Detect:

- Enable the check box and make sure "Wear Mask" is selected<br />
- The detection zone will be the whole image by default, Clear and redraw the rule if needed<br />
- Save

[[File:How to Enable Human Attributes With Mask Alerts-4.png|800px]]

==Human Attributes with Mask Alerts turned OFF==

===Video Instructions===
<embedvideo service="youtube">https://youtu.be/JJoWufE0xRA</embedvideo>

===Step by Step Instructions===
1.Login to the recorder's Webui

[[File:How to Enable Human Attributes Without Mask Alerts-1.png|800px]]

2. Click on the AI tab

[[File:How to Enable Human Attributes Without Mask Alerts-2.png|800px]]

3. Navigate to:<br />
Parameter:>Face Detection

- Leave the Alarm type on Regular
- Enable and Save

[[File:How to Enable Human Attributes Without Mask Alerts-3.png|800px]]