Thermal/How To Enable Human Attributes

Revision as of 23:26, 28 April 2020 by William.V (talk | contribs) (Human Attributes with Mask Alerts turned OFF)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Description

This article will go over two types Human Attributes that can be enabled on the NVR's Local UI for AI Statistics

1. Human Attributes with Mask Alerts turned ON
2. Human Attributes with Mask Alerts turned OFF

The Human Attributes Stamps are only visible through the NVR's Local Display

Human Attributes with Mask Alerts turned ON

Video Instructions

Step by Step Instructions

1. Login to the recorder's UI

How to Enable Human Attributes With Mask Alerts-1.png

2. Go to the AI tab

How to Enable Human Attributes With Mask Alerts-2.png

3. Navigate to:

- Parameters>Face detection
- Under "Alarm Type" switch it from Regular to Mask Detect

How to Enable Human Attributes With Mask Alerts-3.png

4. Once that is switched to Mask Detect:

- Enable the check box and make sure "Wear Mask" is selected
- The detection zone will be the whole image by default, Clear and redraw the rule if needed
- Save

How to Enable Human Attributes With Mask Alerts-4.png

Human Attributes with Mask Alerts turned OFF

Video Instructions

Step by Step Instructions

1.Login to the recorder's Webui

How to Enable Human Attributes Without Mask Alerts-1.png

2. Click on the AI tab

How to Enable Human Attributes Without Mask Alerts-2.png

3. Navigate to:
Parameter:>Face Detection

- Leave the Alarm type on Regular - Enable and Save

How to Enable Human Attributes Without Mask Alerts-3.png