Thermal/Thermal Install Format SDCard

Description

This article covers the proper steps of installing an SD card to our DH-TPC-BF5421-T

Prerequisites

  • SD Card (256GB MAX)
  • Torx Screwdriver

Video Instructions

Step by Step Instructions

1. Unscrew the torx screw and lift the hatch located on the bottom of the camera. Install the SD Card

How to Install and Format SD Card Thermalcam-5.png

2. Boot up the camera and login to the WEBUI

How to Install and Format SD Card Thermalcam-1.png

3. Navigate to: Settings > Storage

Assure that the schedule is setup for Alarm for Thermal Alarms. Motion is also and option if needed

How to Install and Format SD Card Thermalcam-2.png

4. Go to the Destination tab on the left and maske sure that Local is checked

How to Install and Format SD Card Thermalcam-3.png

5. Still on Destination go to the "Local" tab, highlight the SD card and click on format. The camera will reboot and the SD card is now properly installed

How to Install and Format SD Card Thermalcam-4.png