Time Attendance/SmartPSS/Add User to Device

Revision as of 16:07, 28 March 2018 by William.V (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Add User to Device

Description

This article will go over creating and binding a user to a ASA2212A through SmartPSS

Prerequisites

  • SmartPSS v2.02
  • ASA2212A

Step by Step Instructions

1. Open SmartPSS and click on the "Attendance" tab

SPSSAddUser-1.jpg

2. Click on the "User" icon on the left to enter the User tab and then click on "Manual add"

SPSSAddUser-2.jpg

3. Fill in the information for the user and click on "Finish" to save.

SPSSAddUser-3.jpg

4. If done correctly, you will see the user in the field below.

SPSSAddUser-4.jpg

5. To bind the user to the unit we need to click on "Access Control"

SPSSAddUser-5.jpg

6. Enable the "Edit" option and on the drop-down bar select the department the user was added to.

SPSSAddUser-6.jpg

7.The user will populate, check the boxes on the user and the unit you want to bind them to and click on "Bind device"

SPSSAddUser-7.jpg

8. If done correctly you will see a successful pop up and the user has now been added to the unit.

SPSSAddUser-8.jpg