Time Attendance/SmartPSS/Add User with Access Card to Device with DHI ASM100

Revision as of 22:20, 27 March 2018 by William.V (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Add User to Device with DHI-ASM100

Description

This article will go over card registrations on a ASA2212A over SmartPSS using our card reader the DHI-ASM100

Prerequisites

  • SmartPSS v2.02
  • ASA2212A
  • DHI-ASM100
  • 13.56MHz MIFARE Card

Step by Step Instructions

1.Open SmartPSS and go to Attendance

ASA2212AUwCSPSS-1.jpg

2.Click on the "User" icon on the left

ASA2212AUwCSPSS-2.jpg

3.Select Manual Add to create a new user

ASA2212AUwCSPSS-3.jpg

4.On the "Card No." field you'll see that it not ready. Now connect the DHI-ASM100 to your PC

ASA2212AUwCSPSS-4.jpg

5.The Card Reader should now beep once indicating that it's powered up at connected

ASA2212AUwCSPSS-6.jpg

6.Go ahead and click on the field, this will start the scanning process

ASA2212AUwCSPSS-5.jpg

7.Place your MIFARE Card on the reader and you will see the red LED turn green

ASA2212AUwCSPSS-7.jpg

8.The card number will populate and click on "Finish" to finalize the registration

ASA2212AUwCSPSS-8.jpg