ToolBox ConfigTool Modify IP
Revision as of 01:45, 16 February 2018 by Mark (talk | contribs) (Created page with "==Modify IP address of Dahua Device through ConfigTool via Dahua ToolBox== ===Description=== * Modify IP address of Dahua Device if user name and password are factory default....")
Contents
Modify IP address of Dahua Device through ConfigTool via Dahua ToolBox
Description
- Modify IP address of Dahua Device if user name and password are factory default.
- Modify IP address of Dahua Device if user name and password are modified.
- Note: If your IP Camera is connected to the back of an NVR, these instructions will not apply. Please see, "How to Connect IP Camera to NVR"
Prerequisites
- Dahua ToolBox
- Dahua Toolbox
- Dahua Devices on the same LAN as the PC for using the ConfigTool
Step by Step Instructions
1. Here you can see Dahua Devices on the same LAN are located upon opening the ConfigTool application. Refresh if Dahua devices are not located. You can also manually locate the device by typing in the IP address of the device in the search.
2. To modify IP address of selected device, select the edit button -> select DHCP or for static change the IP address according to the LAN configuration -> Select "OK" to save changes.
- Note: this step pertains if Dahua Devices are using factory default user names and passwords.
- Refresh to verify modified IP address.
