Troubleshoot/NVR/PTZ Troubleshoot

Revision as of 18:51, 29 September 2015 by JP (talk | contribs) (Created page with "Please Note: IP and HD-CVI PTZs do not require an RS458 cable. Controls are sent over the RG59 or CAT5 cable. *Front panel PTZ error *PTZ decoder setup, connection or insta...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Please Note: IP and HD-CVI PTZs do not require an RS458 cable. Controls are sent over the RG59 or CAT5 cable.

  • Front panel PTZ error
  • PTZ decoder setup, connection or installation is not correct.
  • Cable connection is not correct.
  • PTZ setup is not correct.
  • PTZ decoder and NVR protocol is not compatible.
  • PTZ decoder and NVR address is not compatible.
  • When there are several decoders, please add 120 Ohm between the PTZ decoder A/B cables furthest end to delete the reverberation or impedance matching. Otherwise the PTZ control is not stable.
  • The distance is too far.
Retrieved from "https://DahuaWiki.com/index.php?title=Troubleshoot/NVR/PTZ_Troubleshoot&oldid=48"