Video Intercom/How To Configure A VTO2111D WP With WiFi

Revision as of 20:10, 20 November 2019 by Arran Williams (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

These instructions are for Generation 1, IP-based Video Intercom Devices only.
Icon Name Generation Technology SIP 2.0 Example Device 1 Example Device 2 Identifying Characteristic PC Software Mobile App
Gen1-IP Gen 1 IP Non-SIP VTH1550CH VTO2111D-WP No "-2" or "-S" SmartPSS gDMSS or iDMSS

How To Configure A VTO2111D-WP With WiFi

Description

This article will show you how to configure the WiFi connection for a VTO2111D-WP

In addition, WiFi VTO and VTH can also be used without WiFi, connected with a cable.

Prerequisites

  • VTO2111D-WP
  • WiFi Network
  • WiFi Network credentials

Video Instructions

Coming Soon

Step by Step Instructions

1. Log into the web interface of the device

How To Configure A VTO With Wifi - 1.jpg

Default user name and password are 'admin'

2. Click System Config > WiFi Info

Click Open WLAN

How To Configure A VTO With Wifi - 2.jpg

The system will search for and display available WiFi networks

3. Click the "+" next to the WiFi network you wish to connect the device to

How To Configure A VTO With Wifi - 3.jpg


4. Enter the password for the WiFi network

How To Configure A VTO With Wifi - 4.jpg

Click OK

5. The State will show 'Connected' when the device successfully connects to the WiFi network

How To Configure A VTO With Wifi - 5.jpg

6. Click System Config > Network Config > TCP/IP Interface

Eth2 will show the network information for the wireless connection

How To Configure A VTO With Wifi - 6.jpg