Difference between revisions of "Video Intercom/SIP 2.0/How To Setup And Program Modules On DHI-VTO4202F-P-S2"
(Created page with "=How to Setup and program Modules on DHI-VTO4202F-P-S2= ==Description== This guide will go over the wiring and programming of the modular accessories for our DHI-VTO4202F-P-...") |
|||
| Line 4: | Line 4: | ||
This guide will go over the wiring and programming of the modular accessories for our DHI-VTO4202F-P-S2 | This guide will go over the wiring and programming of the modular accessories for our DHI-VTO4202F-P-S2 | ||
| + | |||
| + | The only programmable Module in our product line is the Five-Button Call Panel. | ||
==Prerequisites== | ==Prerequisites== | ||
| Line 13: | Line 15: | ||
==Step By Step Instructions== | ==Step By Step Instructions== | ||
| + | |||
| + | ===Physical Wiring of the Modules=== | ||
| + | |||
| + | You will always start at the DHI-VTO4202F-P-S2 '''OUT''', then go to the next module on the '''IN''' port. Continue this pattern for the rest of the Modules. | ||
| + | |||
| + | [[File:VDP Module Wiring.png|400px]] | ||
| + | |||
| + | ===Programming the Modules=== | ||
| + | |||
| + | 1. Go to the DHI-VTO4202F-P-S2 WEBUI | ||
| + | |||
| + | [[File:How to Setup and program Modules on DHI-VTO4202F-P-S2-1.png|1100px]] | ||
| + | |||
| + | 2. Login to the VTO | ||
| + | |||
| + | [[File:How to Setup and program Modules on DHI-VTO4202F-P-S2-2.png|1100px]] | ||
| + | |||
| + | 3. Go to '''Local Settings''' | ||
| + | |||
| + | [[File:How to Setup and program Modules on DHI-VTO4202F-P-S2-3.png|1100px]] | ||
| + | |||
| + | 4. Click on the nect available entry under '''Facade Layout''' | ||
| + | |||
| + | [[File:How to Setup and program Modules on DHI-VTO4202F-P-S2-4.png|1100px]] | ||
| + | |||
| + | 5. Select the Modules in the order you have them Physically wired | ||
| + | |||
| + | [[File:How to Setup and program Modules on DHI-VTO4202F-P-S2-5.png|1100px]] | ||
| + | |||
| + | 6. If you have multiple modules select the next empty slot. The order is labeled on the image below | ||
| + | |||
| + | [[File:How to Setup and program Modules on DHI-VTO4202F-P-S2-6.png|1100px]] | ||
| + | |||
| + | 7. The modules will populate once added | ||
| + | |||
| + | [[File:How to Setup and program Modules on DHI-VTO4202F-P-S2-7.png|1100px]] | ||
| + | |||
| + | 8. To program the Five-Button Call Panel select the empty box | ||
| + | |||
| + | [[File:How to Setup and program Modules on DHI-VTO4202F-P-S2-8.png|1100px]] | ||
| + | |||
| + | 9. Pick the Room Number you'd like to link it to | ||
| + | |||
| + | [[File:How to Setup and program Modules on DHI-VTO4202F-P-S2-9.png|1100px]] | ||
| + | |||
| + | 10. Select the next box if you have several Rooms you'd like to link | ||
| + | |||
| + | [[File:How to Setup and program Modules on DHI-VTO4202F-P-S2-10.png|1100px]] | ||
| + | |||
| + | 11. Select the second room number | ||
| + | |||
| + | [[File:How to Setup and program Modules on DHI-VTO4202F-P-S2-11.png|1100px]] | ||
| + | |||
| + | 12. In order to save the programming you need to click on '''Confirm''' | ||
| + | |||
| + | [[File:How to Setup and program Modules on DHI-VTO4202F-P-S2-12.png|1100px]] | ||
Revision as of 20:15, 5 May 2021
Contents
How to Setup and program Modules on DHI-VTO4202F-P-S2
Description
This guide will go over the wiring and programming of the modular accessories for our DHI-VTO4202F-P-S2
The only programmable Module in our product line is the Five-Button Call Panel.
Prerequisites
- DHI-VTO4202F-P-S2
- Module Accessories
- PC
Video Instructions
Step By Step Instructions
Physical Wiring of the Modules
You will always start at the DHI-VTO4202F-P-S2 OUT, then go to the next module on the IN port. Continue this pattern for the rest of the Modules.
Programming the Modules
1. Go to the DHI-VTO4202F-P-S2 WEBUI
2. Login to the VTO
3. Go to Local Settings
4. Click on the nect available entry under Facade Layout
5. Select the Modules in the order you have them Physically wired
6. If you have multiple modules select the next empty slot. The order is labeled on the image below
7. The modules will populate once added
8. To program the Five-Button Call Panel select the empty box
9. Pick the Room Number you'd like to link it to
10. Select the next box if you have several Rooms you'd like to link
11. Select the second room number
12. In order to save the programming you need to click on Confirm
