Video Intercom/SIP 2.0/How to setup DHI-VTO4202F-P-S2 with Multiple Floors via ConfigTool

Revision as of 20:20, 29 August 2022 by William.V (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How to setup DHI-VTO4202F-P-S2 with Multiple Floors via ConfigTool

Description

This article will cover the Building Config feature on Configtool.
We will be setting up multiple Floors using the VTO4202F-P-S

Prerequisites

Video Instructions

Step by Step Instructions

1. Make sure VTOs and VTHs are initialized and using the same password.

Note: VTOs and VTHs have different password requirements. VTOs will use 8-Character Alpha Numerical password and VTHs will use a 6-digit password

How to setup DHI-VTO4202F-P-S2 with Multiple Floors via ConfigTool-1.png

2. Navigate over to Building Config

How to setup DHI-VTO4202F-P-S2 with Multiple Floors via ConfigTool-2.png

3. Click on Global Parameters and you will get a popup to fill in login credentials.

How to setup DHI-VTO4202F-P-S2 with Multiple Floors via ConfigTool-3.png

4. Enter the information for the SIP server and login information to the units to give Configtool permission to login to the units and push the SIP Server Configuration. Then click on OK to save.

Global Parameter
Center Number = Leave Default Server Type = VTO
Sever Address = Main VTO IP Address Server Port = 5060
Sever Username = Enter VTO username Sever Password = Enter VTO password
Sip Domain = VDP Register PWD = Leave Default
VTO Username = Enter VTO username VTO Password = Enter VTO password
VTH Username = Enter VTH username VTH Password = Enter VTH Password

How to setup DHI-VTO4202F-P-S2 with Multiple Floors via ConfigTool-4.png

5. Click on Add Node to start your project

How to setup DHI-VTO4202F-P-S2 with Multiple Floors via ConfigTool-5.png

6. Enter the information for your node and click on OK to save.

Organization tree node
Unit VTO(Main) = Check it to add Main VTO
Floor Start Room = (Starting number for the first floor) Number = (The amount of Floors in the building)
Room Start Room = (Starting number for the first room per floor) Number = (The amount of Rooms per Floor)
Extension Start Extension = (Starting number for VTH extension) Number = (The amount of VTHs per Room)
Note: Start Extension cannot be changed. All VTHs in a room MUST start at #0

How to setup DHI-VTO4202F-P-S2 with Multiple Floors via ConfigTool-6.png

7. You now need to individually associate each device to its corresponding entry on the node. Start by checking the VTO entry under the device tree and then checking the node entry for Unit VTO(Main). Then click on the Association button to link them.

How to setup DHI-VTO4202F-P-S2 with Multiple Floors via ConfigTool-7.png

8. Do the same for all the VTHs. Remember, they need to be associated one at a time.

How to setup DHI-VTO4202F-P-S2 with Multiple Floors via ConfigTool-8.png

9. Once all the devices are associated to go Association List, Check all the devices and then Config
Configtool will now push the SIP configuration to all the devices.

How to setup DHI-VTO4202F-P-S2 with Multiple Floors via ConfigTool-9.png

10. If done correctly you will get the Configuration operation completed! popup and the devices will have a green check mark next to them.

How to setup DHI-VTO4202F-P-S2 with Multiple Floors via ConfigTool-10.png