Difference between revisions of "Video Intercom/SIP 2.0/Single VTH and VTO Onekey Config Setup"
(Created page with "=Single VTH and VTO One key Config Setup=") |
|||
| Line 1: | Line 1: | ||
=Single VTH and VTO One key Config Setup= | =Single VTH and VTO One key Config Setup= | ||
| + | ==Description== | ||
| + | |||
| + | This article will go over the One-Key Config setup on our VTH2421F-P. As of writing this article, the VTH2421F-P is the only model that support this feature. | ||
| + | |||
| + | The VTH does not have a Web interface so the whole setup will be done on the local Interface. | ||
| + | |||
| + | ==Pre-requisites== | ||
| + | * VTO | ||
| + | * VTH | ||
| + | * [https://dahuawiki.com/images/Files/Software/VDP_Config/985997_General_VDPConfig_Eng_V1.008.0000000.3.R.20191115.zip VDP Config] | ||
| + | |||
| + | ==Video Instructions== | ||
| + | <embedvideo service="youtube">https://youtu.be/b1tfsjh4kOo</embedvideo> | ||
| + | |||
| + | ==Step by Step Instructions== | ||
Revision as of 22:24, 16 October 2020
Contents
Single VTH and VTO One key Config Setup
Description
This article will go over the One-Key Config setup on our VTH2421F-P. As of writing this article, the VTH2421F-P is the only model that support this feature.
The VTH does not have a Web interface so the whole setup will be done on the local Interface.
Pre-requisites
- VTO
- VTH
- VDP Config
