Video Intercom/SIP 2.0/Single VTH and VTO Onekey Config Setup

Revision as of 18:24, 19 October 2020 by William.V (talk | contribs)

Single VTH and VTO One key Config Setup

Description

This article will go over the One-Key Config setup on our VTH2421F-P. As of writing this article, the VTH2421F-P is the only model that support this feature.

The VTH does not have a Web interface so the whole setup will be done on the local Interface.

Pre-requisites

Video Instructions

Step by Step Instructions

1. Make sure the VTO and VTH are booted up by checking with VDP Config

Single VTH and VTO One-key Config Setup-1.png

2. Go to the local UI of the VTH to start the initialization. Select the language and tap on "OK"

Single VTH and VTO One-key Config Setup-2.png

3. Enter a 6 digit password to initialize the VTH

Single VTH and VTO One-key Config Setup-3.png

4. Tap on "OK" to start the One-Key Config

Single VTH and VTO One-key Config Setup-4.png

5. Tap on "Initialize" to initialize the VTO

Single VTH and VTO One-key Config Setup-5.png

6. The VTO requires an 8 digit and numerical combination for the password. Tap on "OK" to finalize the initialization.

Single VTH and VTO One-key Config Setup-6.png

7. Tap on "Next" to Continue

Single VTH and VTO One-key Config Setup-7.png

8. We will need to configure the VTH so tap on "Edit"

Single VTH and VTO One-key Config Setup-8.png

9. Assign the VTH as a Main and configure the network settings if needed. Tap on "OK" to save.

Single VTH and VTO One-key Config Setup-9.png

10. Tap on "Edit" on the VTO to start the Configuration

Single VTH and VTO One-key Config Setup-10.png

11. Set the VTO as a Main and edit any Network/Time and Date Settings. Tap on "OK" to save

Single VTH and VTO One-key Config Setup-11.png

12. Tap on the "One-Key Config" button once both devices are configured.

Single VTH and VTO One-key Config Setup-12.png

13. Tap on "OK" to Continue

Single VTH and VTO One-key Config Setup-13.png

14. The one key config page will stay up. Hit cancel to end the process.

Single VTH and VTO One-key Config Setup-14.png

15. Tap on "OK" and wait around 5 minutes for the units to reboot and finalize any final configurations.

Single VTH and VTO One-key Config Setup-15.png