Difference between revisions of "Video Intercom/SIP 2.0/Stand Alone VTH and VTO Setup"

(Step by Step Instructions)
(Description)
(One intermediate revision by the same user not shown)
Line 5: Line 5:
 
This guide will use a VTO2000A and VTH1510
 
This guide will use a VTO2000A and VTH1510
  
The setup will be similar for
 
 
==Prerequisites==
 
==Prerequisites==
 
* VTO and VTH initialized and set up on network
 
* VTO and VTH initialized and set up on network
Line 35: Line 34:
 
3. Log into the device by entering the Username and Password and click Login
 
3. Log into the device by entering the Username and Password and click Login
  
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_6.jpg]]
+
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_6.jpg|500px]]
  
 
4. Click Local Setting
 
4. Click Local Setting
  
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_7.jpg]]
+
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_7.jpg|500px]]
  
 
5. Under Basic settings, confirm the information being used.
 
5. Under Basic settings, confirm the information being used.
Line 45: Line 44:
 
In this example we will use the default
 
In this example we will use the default
  
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_8.jpg]]
+
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_8.jpg|500px]]
  
 
Villa Call No. = 9901
 
Villa Call No. = 9901
  
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_9.jpg]]
+
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_9.jpg|500px]]
  
 
6. Now the SIP function must be enabled and configured  
 
6. Now the SIP function must be enabled and configured  
Line 55: Line 54:
 
Click Network Settings
 
Click Network Settings
  
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_10.jpg]]
+
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_10.jpg|500px]]
  
 
7. Click SIP Server
 
7. Click SIP Server
  
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_11.jpg]]
+
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_11.jpg|500px]]
  
 
8. In this example, the VTO device itself will act as the SIP server
 
8. In this example, the VTO device itself will act as the SIP server
Line 65: Line 64:
 
To make changes to SIP Server settings, start by unchecking the box next to Enable
 
To make changes to SIP Server settings, start by unchecking the box next to Enable
  
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_12.jpg]]
+
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_12.jpg|500px]]
  
 
The fields can now be edited
 
The fields can now be edited
  
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_13.jpg]]
+
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_13.jpg|500px]]
  
 
* Server Type - VTO
 
* Server Type - VTO
 
* IP Address - IP Address of VTO device , in this example 192.168.2.163
 
* IP Address - IP Address of VTO device , in this example 192.168.2.163
*
+
* Port - 5060 - Leave at default
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_14.jpg]]
+
 
 +
* SIP Server Username - Username for VTO
 +
* SIP Server Password - Password for VTO
 +
 
 +
9. Once all information has been entered, check the box to enable SIP Server
 +
 
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_14.jpg|500px]]
 +
 
 +
10. Click 'Save' to save settings
  
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_15.jpg]]
+
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_15.jpg|500px]]
  
 
===VTH Setup===
 
===VTH Setup===

Revision as of 18:13, 7 November 2019

Stand Alone VTH and VTO Setup

Description

This guide will show how to setup a VTO and VTH device on a network

This guide will use a VTO2000A and VTH1510

Prerequisites

  • VTO and VTH initialized and set up on network
  • VTO and VTH log in information

Video Instructions

Step by Step Instructions

VTO Setup

1. Log into the web interface of the VTO by entering the IP

You can find the current IP of the VTO by using VDPConfig from a local computer

Stand Alone VTH and VTO Setup - SIP - 1.jpg

Enter the IP into Internet Explorer

Stand Alone VTH and VTO Setup - SIP - 2.jpg

2. The Device Initialization will appear if this device has not been initialized

Device Initialization Steps:

3. Log into the device by entering the Username and Password and click Login

Stand Alone VTH and VTO Setup - SIP - 6.jpg

4. Click Local Setting

Stand Alone VTH and VTO Setup - SIP - 7.jpg

5. Under Basic settings, confirm the information being used.

In this example we will use the default

Stand Alone VTH and VTO Setup - SIP - 8.jpg

Villa Call No. = 9901

Stand Alone VTH and VTO Setup - SIP - 9.jpg

6. Now the SIP function must be enabled and configured

Click Network Settings

Stand Alone VTH and VTO Setup - SIP - 10.jpg

7. Click SIP Server

Stand Alone VTH and VTO Setup - SIP - 11.jpg

8. In this example, the VTO device itself will act as the SIP server

To make changes to SIP Server settings, start by unchecking the box next to Enable

Stand Alone VTH and VTO Setup - SIP - 12.jpg

The fields can now be edited

Stand Alone VTH and VTO Setup - SIP - 13.jpg

  • Server Type - VTO
  • IP Address - IP Address of VTO device , in this example 192.168.2.163
  • Port - 5060 - Leave at default
  • SIP Server Username - Username for VTO
  • SIP Server Password - Password for VTO

9. Once all information has been entered, check the box to enable SIP Server

Stand Alone VTH and VTO Setup - SIP - 14.jpg

10. Click 'Save' to save settings

Stand Alone VTH and VTO Setup - SIP - 15.jpg

VTH Setup