Difference between revisions of "Video Intercom/SIP 2.0/Stand Alone VTH and VTO Setup"

From Dahua Wiki

Jump to: navigation, search
(Description)
(Prerequisites)
 
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
=Stand Alone VTH and VTO Setup=
 
=Stand Alone VTH and VTO Setup=
 
==Description==
 
==Description==
This guide will show how to setup a VTO and VTH device on a network
+
This guide will show how to setup a VTO and VTH device on a network  
  
 
This guide will use a VTO2000A and VTH1510
 
This guide will use a VTO2000A and VTH1510
Line 8: Line 8:
 
* VTO and VTH initialized and set up on network
 
* VTO and VTH initialized and set up on network
 
* VTO and VTH log in information
 
* VTO and VTH log in information
*
+
 
 
==Video Instructions==
 
==Video Instructions==
<embedvideo service="youtube">https://www.youtube.com/watch?v=EXAMPLE</embedvideo>
+
<embedvideo service="youtube">https://youtu.be/eyHa6MGn7Sc</embedvideo>
 +
 
 
==Step by Step Instructions==
 
==Step by Step Instructions==
 
===VTO Setup===
 
===VTO Setup===
 
1. Log into the web interface of the VTO by entering the IP
 
1. Log into the web interface of the VTO by entering the IP
  
You can find the current IP of the VTO by using VDPConfig from a local computer
+
You can find the current IP of the VTO by using [[Software/Dahua Toolbox/VDPConfig|VDPConfig]] from a local computer
  
 
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_1.jpg|500px]]
 
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_1.jpg|500px]]
Line 46: Line 47:
 
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_8.jpg|500px]]
 
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_8.jpg|500px]]
  
Villa Call No. = 9901
+
'''Villa Call No. = 9901'''
  
 
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_9.jpg|500px]]
 
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_9.jpg|500px]]
Line 86: Line 87:
  
 
===VTH Setup===
 
===VTH Setup===
 +
1. Power on the VTH
 +
 +
Device Initialization will appear if this device has not been initialized
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_16.jpg|500px]]
 +
 +
* Password - create a password for the device
 +
* Confirm Pwd - confirm created password
 +
* Email - email address used for password recovery
 +
 +
Select OK once all information has been entered
 +
 +
2. A message will confirm successful device initialization
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_17.jpg|500px]]
 +
 +
3. From the Main Menu 'long press' or tap and hold the 'Setting' button for over 6 seconds to enter Advanced Settings
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_18.jpg|500px]]
 +
 +
4. Enter the password for the device and select OK
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_19.jpg|500px]]
 +
 +
5. Network
 +
 +
Confirm the IP information for the VTH device
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_20.jpg|500px]]
 +
 +
6. VTH Config
 +
 +
Tap the field next to 'Room No.' to change the setting
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_21.jpg|500px]]
 +
 +
The VTH Room No. will be the VTO's Villa Call Number with an added '#0'
 +
 +
In this example we will use the VTO's Call No. of 9901 + #0
 +
 +
9901#0
 +
 +
Tap OK once the information has been entered
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_22.jpg|500px]]
 +
 +
7. SIP Server
 +
 +
In this example the VTO has been configured to act as the SIP Server, so the VTO device information will be entered in this section in the highlighted fields
 +
 +
All other fields should be left at their default settings
 +
 +
* Server IP - IP Address of VTO
 +
 +
* User Name - User Name for VTO
 +
* Login Pwd - Password for VTO
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_23.jpg|500px]]
 +
 +
8. Once the information has been entered
 +
 +
Tap the toggle next to 'Enable Status' to On
 +
 +
Tap OK to save settings
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_24.jpg|500px]]
 +
 +
9. VTO Config
 +
 +
Enter the information for the VTO device:
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_25.jpg|500px]]
 +
 +
10. Once the information has been entered
 +
 +
Tap the toggle next to 'Enable Status' to On
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_26.jpg|500px]]
 +
 +
11. A message will pop up to confirm
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_27.jpg|500px]]
 +
 +
12. The VTH is now configured
 +
 +
Tap the Home icon in the top right to return to the Home screen
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_28.jpg|500px]]
 +
 +
13. Once the devices have been both configured properly it can take a few minutes for the devices to complete the connection between the devices
 +
 +
You can monitor the status of the connection by checking the upper right corner of the VTH
 +
 +
This icon will be displayed when there is no active connection to the VTO:
 +
 +
[[File:VTH_no_connection_icon.jpg]]
 +
 +
14. Once the icon has been cleared then the devices should be ready to communicate.
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_29.jpg|500px]]
 +
 +
15. Test a call by pressing the call button on the VTO and you should receive a call at the VTH
 +
 +
[[File:Stand_Alone_VTH_and_VTO_Setup_-_SIP_-_30.jpg|500px]]

Latest revision as of 20:54, 7 November 2019

Stand Alone VTH and VTO Setup

Description

This guide will show how to setup a VTO and VTH device on a network

This guide will use a VTO2000A and VTH1510

Prerequisites

  • VTO and VTH initialized and set up on network
  • VTO and VTH log in information

Video Instructions

Step by Step Instructions

VTO Setup

1. Log into the web interface of the VTO by entering the IP

You can find the current IP of the VTO by using VDPConfig from a local computer

Stand Alone VTH and VTO Setup - SIP - 1.jpg

Enter the IP into Internet Explorer

Stand Alone VTH and VTO Setup - SIP - 2.jpg

2. The Device Initialization will appear if this device has not been initialized

Device Initialization Steps:

3. Log into the device by entering the Username and Password and click Login

Stand Alone VTH and VTO Setup - SIP - 6.jpg

4. Click Local Setting

Stand Alone VTH and VTO Setup - SIP - 7.jpg

5. Under Basic settings, confirm the information being used.

In this example we will use the default

Stand Alone VTH and VTO Setup - SIP - 8.jpg

Villa Call No. = 9901

Stand Alone VTH and VTO Setup - SIP - 9.jpg

6. Now the SIP function must be enabled and configured

Click Network Settings

Stand Alone VTH and VTO Setup - SIP - 10.jpg

7. Click SIP Server

Stand Alone VTH and VTO Setup - SIP - 11.jpg

8. In this example, the VTO device itself will act as the SIP server

To make changes to SIP Server settings, start by unchecking the box next to Enable

Stand Alone VTH and VTO Setup - SIP - 12.jpg

The fields can now be edited

Stand Alone VTH and VTO Setup - SIP - 13.jpg

  • Server Type - VTO
  • IP Address - IP Address of VTO device , in this example 192.168.2.163
  • Port - 5060 - Leave at default
  • SIP Server Username - Username for VTO
  • SIP Server Password - Password for VTO

9. Once all information has been entered, check the box to enable SIP Server

Stand Alone VTH and VTO Setup - SIP - 14.jpg

10. Click 'Save' to save settings

Stand Alone VTH and VTO Setup - SIP - 15.jpg

VTH Setup

1. Power on the VTH

Device Initialization will appear if this device has not been initialized

Stand Alone VTH and VTO Setup - SIP - 16.jpg

  • Password - create a password for the device
  • Confirm Pwd - confirm created password
  • Email - email address used for password recovery

Select OK once all information has been entered

2. A message will confirm successful device initialization

Stand Alone VTH and VTO Setup - SIP - 17.jpg

3. From the Main Menu 'long press' or tap and hold the 'Setting' button for over 6 seconds to enter Advanced Settings

Stand Alone VTH and VTO Setup - SIP - 18.jpg

4. Enter the password for the device and select OK

Stand Alone VTH and VTO Setup - SIP - 19.jpg

5. Network

Confirm the IP information for the VTH device

Stand Alone VTH and VTO Setup - SIP - 20.jpg

6. VTH Config

Tap the field next to 'Room No.' to change the setting

Stand Alone VTH and VTO Setup - SIP - 21.jpg

The VTH Room No. will be the VTO's Villa Call Number with an added '#0'

In this example we will use the VTO's Call No. of 9901 + #0

9901#0

Tap OK once the information has been entered

Stand Alone VTH and VTO Setup - SIP - 22.jpg

7. SIP Server

In this example the VTO has been configured to act as the SIP Server, so the VTO device information will be entered in this section in the highlighted fields

All other fields should be left at their default settings

  • Server IP - IP Address of VTO
  • User Name - User Name for VTO
  • Login Pwd - Password for VTO

Stand Alone VTH and VTO Setup - SIP - 23.jpg

8. Once the information has been entered

Tap the toggle next to 'Enable Status' to On

Tap OK to save settings

Stand Alone VTH and VTO Setup - SIP - 24.jpg

9. VTO Config

Enter the information for the VTO device:

Stand Alone VTH and VTO Setup - SIP - 25.jpg

10. Once the information has been entered

Tap the toggle next to 'Enable Status' to On

Stand Alone VTH and VTO Setup - SIP - 26.jpg

11. A message will pop up to confirm

Stand Alone VTH and VTO Setup - SIP - 27.jpg

12. The VTH is now configured

Tap the Home icon in the top right to return to the Home screen

Stand Alone VTH and VTO Setup - SIP - 28.jpg

13. Once the devices have been both configured properly it can take a few minutes for the devices to complete the connection between the devices

You can monitor the status of the connection by checking the upper right corner of the VTH

This icon will be displayed when there is no active connection to the VTO:

VTH no connection icon.jpg

14. Once the icon has been cleared then the devices should be ready to communicate.

Stand Alone VTH and VTO Setup - SIP - 29.jpg

15. Test a call by pressing the call button on the VTO and you should receive a call at the VTH

Stand Alone VTH and VTO Setup - SIP - 30.jpg