Notice: Firmware Links Under Maintenance We are currently undergoing maintenance on all firmware links. If any links are inaccessible, please email or contact Tech Support for the firmware. We appreciate your patience during the maintenance, thank you for your understanding.

IVS2.0:NewSystemUI/People Counting

People Counting Setup via New SystemUI

Description

This guide will show how to enable People Counting in the New SystemUI on a Dahua device

Prerequisites

  • Dahua device with People Counting feature and New SystemUI

Video Instructions

Step By Step Instructions

1. From the Main Menu

Select AI

People Counting - New SystemUI - 1.jpg

2. A Smart Plan must be created for the channel

Select Parameters > Smart Plan

People Counting - New SystemUI - 2.jpg

3. Use the drop-down box to select the channel

People Counting - New SystemUI - 3.jpg

4. Click to select/enable People Counting

People Counting - New SystemUI - 4.jpg

5. Click Apply to save

People Counting - New SystemUI - 5.jpg

6. Now the People Counting feature must be enabled

Select Parameters > People Counting

People Counting - New SystemUI - 6.jpg

7. Use the drop-down box to select the channel

Toggle the switch to Enable

People Counting - New SystemUI - 7.jpg

8. Click the 'Rule' button to create the target area for People Counting

People Counting - New SystemUI - 8.jpg

9. The channel will full screen and display the People Counting menu

People Counting - New SystemUI - 9.jpg

10. Click the Trash icon to clear any existing rules that have been created

People Counting - New SystemUI - 10.jpg

11. To create the target area for People Counting

Start by left clicking in the video frame

People Counting - New SystemUI - 11.jpg

12. A line will be created

Extend the line as desired, then left click again to end the line segment.

Continue to draw the area until the box is complete

People Counting - New SystemUI - 12.jpg

13. Once the area is complete you drag the entire box to move it around the screen

People Counting - New SystemUI - 13.jpg

14. You can also click any vertex of the detection zone to adjust the size and shape

People Counting - New SystemUI - 14.jpg

15. You can enter a name for the rule in the Name field

The direction of the People Counting feature can be adjusted using the drop-down box next to 'Direction'. The arrow that is drawn through the detection zone will show the direction of what will be defined as 'Entry'

People Counting - New SystemUI - 15.jpg

16. Once all parameters have been entered

Click OK to save

People Counting - New SystemUI - 16.jpg

17. Use the additional parameters to adjust other settings for the People Counting feature:

People Counting - New SystemUI - 17.jpg

18. The Live View can now show live People Counting

People Counting - New SystemUI - 18.jpg